Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📋 Scope and Significance ASTM D1018-11 (Reapproved 2016) is a standard test method for determining hydrogen content in petroleum fractions that can be burned completely without smoking in a wick lamp. The values stated in SI units are to beā¦
ASTM D1013-93 (Reapproved 1998) is the standard test method for determining total nitrogen in nitrogen-containing resins and plastics. It is widely used for quality control and purity assessment in the production of amine resins and other nitrogenous polymers. 📌 Scopeā¦
ASTM D1014-18, “Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates,” provides essential guidelines for evaluating the outdoor durability of coatings applied to metal surfaces. By specifying substrate types and preparation methods, this practice reducesā¦
ASTM D1015-05 (Reapproved 2015) specifies a precise procedure for measuring the freezing points of high-purity hydrocarbons. The method relies on the interpretation of time-temperature freezing or melting curves to determine an accurate freezing point, which is then used with Testā¦
ASTM D1006/D1006M-21 establishes standardized procedures for exterior exposure testing of paints applied to wood and wood composite materials. This practice encompasses specimen selection, preparation, paint application, and evaluation of weathering performance. 📐 Specimen Geometry and Types The selection of woodā¦
📜 Scope and Applicability This specification covers sec-butyl alcohol (also known as 2-butanol and secondary butanol) for use in paint, varnish, lacquer, and related products. The standard values are stated in SI units, and all specified limits are evaluated inā¦
📐 Specimen Geometry and Test Applicability ASTM D1004-21 is specifically designed to determine the tear resistance of flexible plastic film and sheeting. This test method measures the force required to initiate tearing by utilizing a specimen geometry that produces aā¦
📐 Scope and Apparatus Requirements ASTM D1005‑95 (Reapproved 2024) defines standard test methods for measuring dry‑film thickness of organic coatings including paints, varnishes, and lacquers using micrometers. The standard covers four procedures: A and B for stationary micrometers, and Cā¦
📐 Tape Classification and Specimen Geometry ASTM D1000-24 provides standardized test methods for pressure-sensitive adhesive-coated tapes used in electrical and electronic applications. The standard classifies tapes into two primary categories based on their backing material. Class 1 encompasses non-elastomeric backingsā¦
🔬 Overview of ASTM D1002-10 (Reapproved 2019) ASTM D1002-10 describes the determination of the apparent shear strength of adhesives for bonding metals when tested on a standard single-lap-joint specimen. This standard emphasizes that the accuracy and reliability of the testā¦