Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D4867/D4867M – 22´1 provides a standardized laboratory procedure to determine the susceptibility of compacted asphalt mixtures to moisture damage. By comparing the tensile strength of dry specimens with those subjected to accelerated moisture conditioning, this test method quantifies theā¦
ASTM D4868-17 establishes a purely empirical procedure for estimating both the gross and net heat of combustion of hydrocarbon fuels. Expressed in SI units (MJ/kg), this estimation relies on analyzing the fuel’s density, sulfur, water, and ash content, offering aā¦
📐 Scope and Application This performance specification, designated D4866/D4866M, covers mixtures of emulsified coal-tar pitch (mineral colloid type), mineral aggregates, and optional polymeric admixtures. These formulations are designed as weather-protective and straight aliphatic hydrocarbon resistant coatings over bituminous pavements ofā¦
📋 Scope and Significance This test method covers the determination of methanol in propylene concentrates in the range of approximately 4 mg/kg to 40 mg/kg (parts-per-million by mass). The values stated in SI units are regarded as standard, with otherā¦
ASTM D4865-23 is the Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems. It describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation, and methods forā¦
📐 Scope and Purpose of D4863 Standard D4863-13, developed by ASTM Subcommittee D02.B0.06 on Two-Stroke Cycle Gasoline, provides a rigorous standardized test method for determining the lubricity of two-stroke-cycle gasoline engine lubricants. Specifically, the test evaluates the ability of aā¦
🔬 Scope and Sampling Principles ASTM D4861-23 is a standard practice for sampling air to detect pesticides and polychlorinated biphenyls (PCBs) and provides guidance on selecting analytical methods. Developed in accordance with internationally recognized standards, it covers common pesticides andā¦
ASTM D4859-13 specifies the performance requirements for two-stroke-cycle spark-ignition gasoline engine lubricants designated “TC”. This standard is aimed at engines other than outboard motors, specifically those prone to ring sticking, deposit-induced preignition, piston scuffing, and spark plug fouling. SI unitsā¦
🧪 Scope and Significance of D4860‑22 The ASTM D4860‑22 standard provides a rapid, portable method for the field and laboratory assessment of middle distillate and aviation turbine fuels. Its primary purpose is to numerically rate free water and quantify visibleā¦
📐 Scope and Referenced Apparatus ASTM D4858-13 is a standard test method developed under the jurisdiction of ASTM Committee D02 on Petroleum Products, Liquid Fuels, and Lubricants. It is specifically intended to evaluate the performance of lubricants in two-stroke-cycle spark-ignitionā¦