Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
ASTM D5081/D5081M – 90 (Reapproved 2024) establishes a standard laboratory protocol for determining the aggregate layer hiding power. By quantifying the mass of gravel required to prevent light transmission, this method provides critical data for designing roofing systems that protect…
ASTM D5080-20 describes a rapid test method for determining percent compaction and variation from optimum water content in compacted earth. This method utilizes a three-point compaction curve developed from in-place soil without prior water content knowledge, facilitating efficient construction control.…
The ASTM D5079-08 standard establishes comprehensive practices for the preservation, transportation, storage, cataloging, retrieval, and post-test disposition of rock core samples. These practices are critical for maintaining sample integrity from the field to the laboratory, ensuring that test results accurately…
🎯 Scope and Terminology Overview ASTM D5077 – 90 (Reapproved 2021) establishes standardized terminology for Electrostatic Discharge (ESD) Packaging Materials. This standard provides a uniform vocabulary for engineers and quality assurance teams working with sensitive electronic components, covering everything from…
📋 Scope and General Requirements ASTM D5078/D5078M-11 (2021) is the standard specification for hot-applied crack fillers used in the maintenance of asphalt concrete and portland cement concrete pavements. This specification covers compounds specifically formulated to effectively fill cracks with a…
📐 Scope and Key Terminology This test method provides two procedures for measuring voids in adhesives between materials in roofing and waterproofing systems. Voids are defined as adhesive defects with at least one dimension equal to or larger than 13…
🔬 Introduction and Scope of D5075-01 ASTM D5075-01 (Reapproved 2022) is a standard test method specifically developed for the determination of nicotine and 3-ethenylpyridine (3-EP) in indoor air. These analytes are widely recognized as specific chemical markers for environmental tobacco…
ASTM D5073-21 establishes standardized procedures for measuring the depth of surface water bodies. It encompasses three distinct methodologies: Manual Measurement (Procedure A), Electronic Sonic-Echo Sounding (Procedure B), and Electronic Nonacoustic Measurement (Procedure C). The practice is designed for use in…
📐 Scope and Terminology This practice covers the preparation of natural-matrix sediment reference samples for collaborative testing of chemical methods. Natural-matrix sediment is defined as granular rock or earthy material naturally deposited in a water body, where finer material encloses…
🧪 Test Method Overview and Applicability ASTM D5072-09 (Reapproved 2024) establishes a standard test method for determining the concentration of radon in drinking water, specifically validated for levels above 2 Bq The method is based on the direct liquid scintillation…