Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Overview of Test Methods for Chloride Determination ASTM D512-23 provides standardized protocols for the determination of chloride ion in water, wastewater (qualified for Test Method C only), and brines. The standard specifies three distinct analytical techniques, allowing the laboratory…
📦 Scope and Application ASTM D5118/D5118M – 22 establishes the standard practice for the fabrication of new fiberboard shipping containers. Its primary coverage includes corrugated and solid fiberboard boxes, liners, and sleeves. The practice is designed to identify and control…
The ASTM D5117-17 standard describes a dye-penetrant test method specifically for evaluating solid fiberglass all-roving reinforced pultruded rod or bar stock. The primary objective of this test is to assess the material’s susceptibility to longitudinal wicking, which is defined as…
The ASTM D5116-17 standard provides a framework for measuring volatile organic compound (VOC) emissions from indoor materials using small-scale environmental test chambers. This guide is essential for evaluating indoor air quality and material safety in building environments. 📐 Scope and…
🏭 Scope and Significance for Fine Coal Processing ASTM D5114/D5114M establishes a rigorous laboratory protocol for the froth flotation of fine coal, specifically material with a nominal top size of 600 µm (No. 30 U.S.A. Standard Sieve Series) or finer.…
ASTM D5115-90 (Reapproved 2004) provides a standardized framework for the empirical determination of Refuse-Derived Fuel (RDF) quality. Recognizing the inherent difficulty in obtaining a perfectly representative single sample from a heterogeneous, multi-ton lot of RDF, this method relies on a…
📐 Test Method Overview and Scope ASTM D5113-97, originally approved in 1997 and reapproved in 2021, provides a standardized procedure for measuring adhesive attack on rigid cellular polystyrene (RCPS) foam. This test method quantifies cavitation damage—the pitting and wearing away…
🎯 Scope and Application of D5112-22 ASTM D5112-22, formally designated as the Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products, establishes procedures for determining resonances of unpackaged products and components via horizontal linear motion applied at the…
🔬 Principle and Scope of the UV Photometric Method ASTM D5110 – 22a provides a standardized methodology for calibrating ozone monitors used in ambient, workplace, and indoor air quality monitoring. It also establishes the protocol for certifying transfer standards for…
🗺️ Scope and Applicability of Standard D5111-12 The ASTM D5111-12 (Reapproved 2020) standard provides a robust framework for selecting locations and sampling methods to monitor atmospheric deposition at non-urban locations. It addresses the full spectrum of deposition, including wet and…