Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔍 Scope and General Requirements ASTM D5204-22 defines the classification system for polyamide‑imide (PAI) molding and extrusion materials. It is intended for use as a standard basis for specification, particularly for procuring end items or parts fabricated from PAI. The…
ASTM D5202/D5202M-16 establishes a standard method for evaluating the triaxial compression creep strength of chemically grouted soils. It is specifically designed to measure the long-term strength and deformation behavior of cylindrical specimens subjected to a constant sustained load under undrained…
♻️ Scope and Source Classifications ASTM D5203-07 specifies the identification of recycled post-consumer high-density polyethylene (HDPE) molding and extrusion materials. This standard covers materials in pellet or chip form derived from defined post-consumer sources, enabling supplier and user agreement on…
📜 Scope and Key Definitions of D5201-05a ASTM D5201-05a (Reapproved 2020) provides a standardized practice for calculating essential formulation physical constants of liquid paints and coatings. These constants include weight solids, volume solids, solvent content, volatile organic compound (VOC) content,…
ASTM D5200-03 (Reapproved 2021) provides a definitive test method for determining the weight percent volatile content of solvent-borne paints in aerosol cans. It overcomes the challenges of pressurized containers, offering a standardized approach for regulatory compliance and quality assurance. This…
📐 Scope and Applicability of D5199 ASTM D5199‑12 (Reapproved 2019) provides a standardized framework for measuring the nominal thickness of geosynthetics. As outlined in Section 1.1, this test method is applicable to most geosynthetic materials, with the notable exception of…
ASTM D520-00 (Reapproved 2019) specifies three types of zinc dust pigment for paints. The standard ensures that the pigment consists essentially of metallic zinc and meets defined composition and physical property requirements. It is governed by ASTM Committee D01 and…
🧪 Scope and Summary of the Practice ASTM D5198-17 (Reapproved 2024) defines a standard practice for the partial digestion of solid waste using nitric acid. This method is designed specifically for the subsequent determination of total recoverable inorganic constituents. It…
ASTM D5197-21 establishes a standardized procedure for the determination of formaldehyde and other carbonyl compounds in air using active sampler methodology. This method is widely applied in indoor air quality investigations, industrial hygiene assessments, and environmental monitoring, functioning as a…
ASTM D5195−21 specifies a nuclear method for determining the in-place wet density of soil and rock at depths below the surface. This standard, under the jurisdiction of ASTM Committee D18, calculates the wet density by comparing the detected rate of…