Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
📜 Scope and Definition of Foots ASTM D1966-69 (Reapproved 1998) specifies the standard gravimetric method for determining the foots content in raw linseed oil. This procedure is commonly known in Europe as the PAT foots method. The term “foots” refersā¦
🔬 Scope and Terminology ASTM D1963 – 85 (Reapproved 1996) specifies the standard test method for determining the specific gravity of drying oils, varnishes, alkyd resins, fatty acids, and related materials. This method is intended for situations where high precisionā¦
🔬 Significance and Apparatus Requirements This test method, designated under ASTM D1964-85 (Reapproved 1995), determines the quality of tung oil by differentiating pure oil from adulterated batches. The test capitalizes on the high degree of conjugated unsaturation in pure tungā¦
🔬 Scope and Significance ASTM D1960-86 defines a standard procedure for determining the mass of moisture and other volatile materials present in natural drying oils. This test method is essential for qualifying incoming raw materials, as residual solvents or volatileā¦
⚗️ Scope, Terminology, and Significance This test method, designated D1962 – 85 (Reapproved 1995), covers the determination of the saponification value of drying oils, bodied oils, fatty acids, and polymerized fatty acids. It is issued under the fixed designation Dā¦
ASTM D1958 – 86 (Reapproved 1995) establishes a gravimetric test method for determining the percentage of matter in oiticica oil that remains insoluble in chloroform. This residue primarily represents mineral contamination, providing an essential purity metric for drying oils usedā¦
The ASTM D1959-97 standard specifies the Wijs procedure for the determination of unsaturation, expressed as Iodine Value (IV), in drying oils and fatty acids. This method is a cornerstone for quality control and research in the coatings and oleochemical industries.ā¦
ASTM D1955-85 defines an empirical method for measuring the gel time of drying oils, specifically tung and oiticica oils, at 300°C. This test is vital for assessing purity and drying characteristics based on the degree of conjugated unsaturation. 🔍 Testā¦
🧪 Overview and Scope The ASTM D1957-86 (Reapproved 2001) test method specifically covers the determination of the hydroxyl content in castor oil, dehydrated castor oil, and their derivatives. The principle involves acetylation of hydroxyl groups using acetic anhydride in aā¦
🧪 Test Method Overview and Significance ASTM D1952 – 86 (Reapproved 1995) “Standard Test Method for Quantitative Determination of Break in Drying Oils” provides a procedure for measuring the amount of insoluble material, known as break, that forms in rawā¦