Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔬 Scope and Significance of D5477-18 ASTM D5477-18 establishes a standardized practice for the identification of distinct polymer layers or inclusions using Fourier Transform Infrared Microspectroscopy (FT-IR). This technique is specifically designed to detect two critical types of polymer entities:…
📐 Specimen Geometry and Types ASTM D5478 covers the measurement of viscosity for both Newtonian and non-Newtonian liquids using a falling needle viscometer. The central geometry of the instrument is a cylindrical needle, the dimensions of which directly influence the…
📜 Scope and Classification Intent The ASTM standard D 5476 – 99, “Standard Classification System for Thermoplastic Polyurethane Materials (TPU),” provides a unified framework for specifying these materials. The Introduction explicitly states its purpose: “This classification system and subsequent line…
🧪 Scope and Applicability This gas chromatographic (GC) test method, designated ASTM D5475-93 (Reapproved 2002), is designed for the determination of specific nitrogen- and phosphorus-containing pesticides in ground water and finished drinking water. The method utilizes a GC equipped with…
ASTM D5474-93 (Reapproved 2012) provides a comprehensive framework for selecting data elements necessary for the documentation of groundwater sites. This guide is essential for hydrogeologists, environmental consultants, and regulatory professionals tasked with investigating the availability, protection, or restoration of groundwater…
📐 Scope and Application ASTM D5472/D5472M provides a standardized practice for conducting specific capacity tests in control wells. It defines specific capacity as the well yield per unit drawdown at a specified time after pumping initiation. This practice is used…
📐 Overview and Scope This practice covers an analytical solution for determining the horizontal and vertical hydraulic conductivity of a nonleaky confined aquifer. It analyzes water level responses to discharges from partially penetrating control wells, using data from Test Method…
📜 Scope and Applicability of D5471-23 ASTM D5471-23 defines the standard specification for ortho-Xylene 980, a critical aromatic hydrocarbon used extensively in the chemical industry. This specification is under the jurisdiction of ASTM Committee D16 and is specifically tailored to…
ASTM D5470-17 (Reapproved 2024) is a standardized test method for determining thermal transmission properties of thermally conductive electrical insulation materials. This test method, under the jurisdiction of ASTM Committee D09, covers the measurement of thermal impedance and the calculation of…
The ASTM D5468-02 (Reapproved 2007) standard specifies a rigorous test method for determining the gross calorific value and ash content of waste materials using modern bomb calorimetry. The method is designed to provide high accuracy for waste-to-energy assessments and material…