Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧪 Preparation of the Analytical Sample These practices, under ASTM D2331-08 (Reapproved 2022), provide directions for the preparation of water-formed deposits for analysis. The sample is typically obtained following Practices D887 for sampling. The preparation includes preliminary examination to identifyā¦
📐 Test Overview and Scope ASTM D2325-68 (Reapproved 2000) specifies the standard test method for determining capillary-moisture relationships in coarse- and medium-textured soils. This method applies to soil-moisture tensions ranging from 10 to 101 kPa (0.1 to 1 atm). Itā¦
ASTM D233-13 (Reapproved 2022), formally titled “Standard Test Methods of Sampling and Testing Turpentine,” provides a comprehensive framework for evaluating the physical properties of turpentine and pinenes. Originally developed to validate solvent quality, these methods now serve a broader roleā¦
🧪 Overview and Purpose of Test Method D2322 ASTM D2322 – 14 (Reapproved 2023) provides a standardized procedure for evaluating the durability and resistance of shoe upper leather when exposed to artificial perspiration. This test method quantifies deterioration by measuringā¦
🔬 Property Requirements and Specification Limits ASTM D2323 – 93 (Reapproved 1997) establishes the quality criteria for refined pyridine, commonly known as “1 Degree” pyridine due to its tight distillation range. All test values must be rounded to the nearestā¦
📐 Scope and Essential Apparatus This test method, designated D2320-98 (Reapproved 2022), specifies the procedure for determining the density and relative density of solid pitch using a pycnometer. It is intended for pitch that can be handled in fragments. Theā¦
🛠️ Installation Recommendations for Thermoplastic Pipe ASTM D2321-20 provides comprehensive guidelines for underground installation of thermoplastic pipe in sewers and gravity-flow applications. These recommendations are designed to ensure a stable underground environment under diverse service conditions. However, due to theā¦
📐 Scope and Significance of the Cube-in-Air Method The ASTM D2319/D2319M standard specifically determines the softening point of pitches with a softening point above 80 °C [176 °F]. This method is often correlated with Test Method D3104 (Mettler Softening Pointā¦
ASTM D2308-07 (Reapproved 2020) defines the standard specification for thermoplastic polyethylene (PE) jackets used as the outer protective layer on medium-voltage electrical wire and cable. Covering voltage ratings from 2 kV to 35 kV, this specification ensures the jacket providesā¦
ASTM D2310-06 (Reapproved 2012) provides a standardized classification system for machine-made “fiberglass” (glass-fiber-reinforced thermosetting-resin) pressure pipe. This standard covers both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP). Classification is based on the method of manufacture, materials, andā¦