Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
The ASTM D560/D560M-24 standard provides test methods for evaluating the durability of compacted soil-cement mixtures under repeated freezing and thawing cycles. These tests determine key properties such as soil-cement losses, water content changes, and volume changes (swell and shrinkage), essential…
ASTM D5599‑22 defines a gas chromatographic procedure utilizing an oxygen selective flame ionization detector (OFID) for the quantitative determination of organic oxygenated compounds in gasoline. The method provides critical data for fuel blending operations, regulatory compliance, and quality control by…
📐 Scope and Applicability D56-22 standardizes the determination of the flash point for liquids using the Tag closed cup apparatus. It is specifically designed for materials with a kinematic viscosity below 5.5 mm²/s (cSt) at 40 °C (104 °F) or…
🏛️ Scope and Applicability Standard Test Method D5598‑20, under the jurisdiction of ASTM Subcommittee D02.A0.01, specifies a vehicle test procedure for evaluating the tendency of unleaded automotive spark‑ignition engine fuels to foul electronic port fuel injectors (PFI). This method was…
ASTM D5596-03 (Reapproved 2021) specifies a standard test method for the microscopic evaluation of carbon black dispersion in polyolefin geosynthetics. This method is applicable to geosynthetics containing less than 5% carbon black by weight and provides a qualitative assessment of…
The ASTM D5594-18 (Reapproved 2024) standard provides a robust FT-IR method for quantifying the vinyl acetate (VA) content in ethylene-vinyl acetate (EVA) copolymers. It utilizes specific infrared absorption bands for VA and internal thickness corrections, ensuring accurate measurements across a…
Plastics are increasingly being used as structural components in durable applications, operating under varied environmental conditions over the lifecycle of the product. ASTM D5592-94 (Reapproved 2018) serves as a crucial guide for engineers, highlighting the specific material properties required for…
📐 Scope and Classification System ASTM D5593 – 99e1 establishes the Standard Classification for Thermoplastic Elastomers—Olefinic (TEO). This system provides a method for calling out materials used in injection molding, extrusion, blow molding, and other melt processing. TEOs covered under…
🔬 Scope and Principle of Test Method D5591-22 ASTM D5591-22, the Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester, defines the procedures for measuring the retractive force generated when a yarn…
Designation D559/D559M −15 (Reapproved 2023)´1 provides standard test methods for assessing the durability of compacted soil-cement mixtures. An editorial correction (ε1) was applied in October 2024 to adjust the temperature variable in Equation 1. These methods determine soil-cement losses, water…