Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🧮 Mass Balance Calculation Methodology ASTM D5663‑15 (Reapproved 2020) establishes a mass balance approach as the sole recommended method for validating recycled content in packaging paper and paperboard. Since no physical or chemical test method can determine the absolute recycled…
ASTM D5664-17 provides a crucial framework for assessing the structural implications of fire-retardant (FR) treatments on dimensional lumber. By establishing standardized procedures for both initial treatment effects and long-term thermal stability, this test method ensures that design professionals have reliable…
📐 Specimen Geometry and Elastomer Materials This test method uses Die C dumbbell specimens as specified in Test Methods D412. Three specific elastomer formulations are tested: nitrile (NBR), polyacrylate (ACM), and fluoroelastomer (FKM) oil seal materials. These represent the typical…
ASTM D5661-95 (Reapproved 2001) outlines a test method for determining the relative solvency of petroleum oils used in ink formulations through a pentaerythritol ester of resin acids (PKP) titration method. This standard is essential for ensuring compositional consistency in petroleum…
The ASTM D5660-96 standard provides a rapid and efficient protocol for evaluating the toxicity of chemically contaminated water, as well as aqueous extracts from soil and sediment, using the luminescent marine bacterium Photobacterium phosphoreum. This test method is specifically designed…
ASTM D5659-14 provides a standardized test method for the determination of chlorophenoxy acid herbicides in various waste matrices using high performance liquid chromatography with ultraviolet detection (HPLC/UV). This method specifically addresses the analysis of 2,4-dichlorophenoxyacetic acid (2,4-D), 2,4,5-trichlorophenoxyacetic acid (2,4,5-T),…
📐 Scope and Applicability ASTM D566-20, also recognized as British Standard 2877, provides a standardized method for determining the dropping point of lubricating grease. This test method is applicable for bath temperatures up to 288 °C; for higher temperature ranges,…
The ASTM D5658-20 standard provides methodological guidance for collecting waste samples from trucks. It focuses on unconsolidated solid wastes in bulk loads, utilizing various sampling equipment such as scoops, triers, and augers. This practice is integral to waste management industries…
📐 Scope and Significance ASTM D5657 – 07 (Reapproved 2023) specifically evaluates the ability of adhesives used for locking and sealing threaded fasteners to create leak-tight assemblies. This test method is critical for applications where fluid migration through the thread…
📖 Scope and Test Summary ASTM D5655-95 (Reapproved 2000) specifically covers the colorimetric analysis of Copper Dimethyldithiocarbamate (CDDC) in treated wood. CDDC is a naturally colored compound that can be quantitatively determined following solvent extraction. All values stated in SI…