Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🏷️ Scope and Significance of ASTM D5899-24 ASTM D5899-24 is a standard classification system specifically developed for rubber compounding materials to be utilized in computer material management systems. The primary goal is to establish a consistent method for retrieving compounding…
ASTM D5898/D5898M −96 (Reapproved 2021) serves as the essential standard guide for designing and detailing adhered sheet waterproofing systems for below-grade structures and plaza applications. This standard provides a structured framework for designers to prepare robust, consistent details ensuring long-term…
This test method, designated ASTM D5896 – 96 (Reapproved 2019)´1, covers the accurate determination of carbohydrate composition in cellulosic materials. Applicable to ground wood meal, chemically refined pulp, mechanical pulps, brownstocks, and plant exudates (gums), this method utilizes ion chromatography…
ASTM D5897 – 13 (Reapproved 2021) specifies an alternative potentiometric titration method for determining the hydroxyl content in cellulose esters. Covering a typical range of 0.7 % to 10.0 % hydroxyl, this test method provides a straightforward approach for evaluating…
📐 Test Methods and Apparatus These test methods describe the determination of several stages and the rate of dry-film formation of organic coatings using straight-line and circular mechanical drying-time recording devices. The mechanical recorders are valuable in comparing the drying…
Standard D5893/D5893M−16 (Reapproved 2021) governs the specification for cold-applied, single-component, chemically curing silicone joint sealants for use in portland cement concrete highway and airfield pavements. Conforming products are based on polysiloxane polymers, with formulations available as Type NS (Non-Sag) for…
🔬 Overview and Significance of D5894-21 ASTM D5894-21, “Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal,” establishes a methodology that alternates exposure between two distinct environmental cabinets to simulate outdoor corrosion. This practice was developed to address the…
ASTM D5892-00 provides a comprehensive material specification for Type IV polymer-modified asphalt cement (PMA) intended for use in pavement construction. Developed under the jurisdiction of ASTM Committee D04 on Road and Paving Materials, this standard specifically addresses binders modified with…
📐 Specimen Preparation and Sieve Requirements This test method covers the evaluation of swelling properties of clay mineral for geosynthetic clay liners (GCLs). The clay mineral must be dried to a constant weight at 105 ± 5 °C. Granular clay…
📐 Purpose and Scope of the Fluid Loss Test ASTM D5891/D5891M-19 specifies an index test method for evaluating the fluid loss properties of the clay mineral component used in Geosynthetic Clay Liners (GCLs). The test measures the filtration control characteristics…