Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🌡️ Overview and Scope of D5949-16 The ASTM D5949-16 (Reapproved 2022) standard provides an automated, alternate procedure for determining the pour point of petroleum products, moving away from the manual tilt method to a precise digital approach. This automatic pressureā¦
📑 Scope and Classification of Thermosetting Molding Compounds ASTM D5948 −05 (Reapproved 2020), issued under the fixed designation D5948, standardizes the classification and basic properties of thermosetting molding compounds. This specification, which is approved for use by agencies of theā¦
📐 Specimen Considerations for Corona-Treated Films This standard, D5946-17, is specifically designed for measuring the contact angle of water on corona-treated polymer film surfaces. It is technically identical to ISO 15989. Proper specimen conditioning according to Practice D618 is criticalā¦
ASTM D5947-24, issued under the fixed designation D5947, provides standardized test methods for determining the physical dimensions of solid plastic specimens. These measurements are critical input data for calculating the results of common mechanical, thermal, and physical property tests. Developedā¦
📖 Introduction and Scope of ASTM D5945-96 This standard, designated ASTM D5945-96, specifies three distinct procedures (A, B, and C) for determining the temperature of deflection under load (bending stress) of plastics and ebonite. The principle involves a standard testā¦
📐 Scope and Material Applicability ASTM D5943-96 specifies a procedure for determining the flexural properties of plastics under defined conditions using a three-point loading test. The method applies to a freely supported beam loaded at midspan, making it suitable forā¦
📐 Scope and General Principles ASTM D5944-96 is a standard guide for describing the general principles for determining the temperature of deflection of plastics under load. It covers procedures for the determination of the temperature of deflection under bending stressā¦
1. Overview and Scope D5942-96 — D5942-96. This ASTM International standard provides standard requirements and technical guidance for materials testing and engineering applications. D e s i g n a t i o n : D 5 9 4 2ā¦
🧪 Mold Design and Specimen Geometry This practice, ASTM D5940-96, defines the standard procedures for preparing small plate test specimens of thermoplastics using Type D ISO molds. The two-cavity molds are designed to produce 60 mm by 60 mm plates,ā¦
📐 Scope and Applicable Materials ASTM D5941-96 defines a comprehensive procedure for determining the Izod impact strength of plastics under defined conditions. The standard is versatile, accommodating a wide range of materials and specimen configurations to investigate impact behavior andā¦