Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Published: May 16, 2026 | Category: HV Insulators | Standard: IEC TS 62371:2008 IEC TS 62371 is a Technical Specification that defines the dimensional and mechanical characteristics of hollow pressurised and unpressurised ceramic and glass insulators used in electrical equipmentā¦
Published: May 16, 2026 | Category: Nuclear Instrumentation | Standard: IEC 62372:2006 IEC 62372 is an international standard that defines standardised measurement methods for determining the light output and intrinsic resolution of housed scintillators used in nuclear instrumentation. Scintillation detectorsā¦
Published: May 16, 2026 | Category: Semiconductor Reliability | Standard: IEC 62373:2006 IEC 62373 defines the standardised bias-temperature (BT) stability test method for MOSFET devices, which is one of the most critical reliability tests in semiconductor manufacturing. The BT testā¦
💡 Standard Snapshot: IEC TS 62367 (Technical Specification, 2004) addresses the safety aspects of xDSL (Digital Subscriber Line) signals on circuits connected to telecommunication networks. It defines voltage and current limits, evaluates the crest factor and peak-to-average ratio of DSLā¦
💡 Standard Snapshot: IEC 62368-3 (Edition 1.0, 2017) addresses the safety aspects of DC power transfer through communication cables in audio/video, information and communication technology (ICT) equipment. It is part of the IEC 62368 series which has replaced IEC 60950ā¦
Standardized framework for assessing electromagnetic field exposure from EAS, RFID, and similar short range devices — covering measurement, modelling, and compliance evaluation Introduction to EMF Exposure Evaluation for Short Range Devices Short range devices (SRDs) such as electronic article surveillanceā¦
💡 Standard Snapshot: IEC 62364 (Edition 1.0, 2013) provides a comprehensive guide for dealing with hydro-abrasive erosion in Kaplan, Francis, and Pelton turbines. It covers erosion mechanisms, prediction methodologies, material selection, design considerations, and maintenance strategies for hydropower plants operatingā¦
💡 Standard Snapshot: IEC 62365 (Edition 2.0, 2009) specifies the method for transmitting digital audio signals over Asynchronous Transfer Mode (ATM) networks. It defines how to pack digital audio samples into ATM cells, establish switched virtual circuits for audio connections,ā¦
💡 Standard Snapshot: IEC 62366-1 (Edition 1.0, 2015, with Corrigendum 1:2016) specifies the usability engineering process for medical devices. It establishes a framework for analyzing, designing, testing, and validating the user interface of medical devices to minimize use errors andā¦
Ferrite cores are manufactured through a powder metallurgy process involving pressing and sintering at temperatures above 1200°C. Despite advances in process control, the manufacturing process inevitably produces cores with minor surface irregularities—chips, cracks, flash, and porosity. The critical engineering questionā¦