Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO·PART7 — BS ISO Standards Single-File Series Overview · Batch 7 — A Compilation of 150 International Standards (ISO) and Their Technical Points
This review covers 150 single-file ISO standards from BS ISO 10216 to BS ISO 11155, systematically summarising space systems, earth-moving machinery, hydraulic fluid power, non-destructive testing, sensory analysis, ski equipment, road-vehicle safety, steel inspection documents, ITS and sterilisation.
This review covers Batch 7 of the BS ISO single-file series, bringing together 150 independent International Standards (ISO) from BS ISO 10216 to BS ISO 11155. The batch spans space systems, earth-moving machinery, hydraulic fluid power, non-destructive testing, sensory analysis, ski equipment, road-vehicle safety, steel inspection documents, intelligent transport systems, sterilisation and gas welding equipment.
💡 This batch includes the space-systems programme-management series (10785–10830), the infrared thermography NDT series (10878, 10880), road-vehicle pedestrian protection (11096), the ski-equipment series (10958, 11087, 11088, 11110), steel inspection documents (10474) and chemical-indicator sterilisation (11140-5). Numerical values should be checked against the current official BSI edition.
1. Series Overview 📌
This batch covers the continuous range BS ISO 10216 to BS ISO 11155. Clusters: 10216–10361 belong to gas welding equipment, human surrogates, cross-country skis, press dies, sulfide concentrates, air cargo, ice-hockey protective equipment, copper sulfide, water chlorophyll, earth-moving machinery product identification, operator guards, nuclear trunnions, linear ball bearings, cigarette nicotine, main-deck containers, steel-tube ultrasonic testing, carpet appearance, pulp fines, gold/silver determination, securities market identifiers, soil pH, vehicle centre of gravity, stationary emissions and sensory analysis; 10376–10638 belong to steel wire ropes, copper electrogravimetry, steel inspection documents, aerospace PTFE hoses, hexagon flange tapping screws, CIE standard illuminants, space data encapsulation, watch crowns, intravascular catheters, excavator lift capacity, articulated-frame locks, crane tyres, resilient floor coverings, GPS dimensioning, commercial-vehicle fixing nuts, electrostatic discharge, textile colorimetric data, hose bending, butterfly valves and rubber antidegradants; 10653–10810 belong to resistance-welding transformers, flange hexagon nuts, brand valuation, fine-ceramic photocatalysis, water gross alpha/beta, ITS message sets, cork stoppers, tea caffeine, hydraulic cylinders, fatigue pressure, pulp cadmium, space systems, Coriolis flowmeters and ductile-iron pipe design; 10813–11021 belong to vibration generators, railway-tunnel vibration, rotating-shaft vibration, graphite NDT, DRI sampling, noise test tracks, Siberian fir needle oil, infrared thermography, collets, spot drills, fibre-cement sheets, daylight utilisation, GRP pipes, bifidobacteria, hydraulic accumulators, snowboards, MJ-thread gauging, cylinder bundles, financial-instrument classification, floor-covering resistance, awning fabrics, earth-moving controls, LNG ships, earth-moving sustainability, air-assisted sprayers, tractor steering, technical product documentation, essential-oil water, glycyrrhizic acid, heavy-vehicle rollover, crane seismic design, sensory colour, scanning-probe drift, workplace arsenic, magnitude estimation, filter media, ITS, aircraft de-icing, ski bindings, ski system assembly, linear calibration, pedestrian protection, space time codes, winter-sports equipment, composite cylinders, quantitative sensory panels, consumer testing, chemical indicators and air filtration.
2. Series Composition and Main Standards
This batch has several large clusters. Space systems (10537, 10785, 10786, 10788, 10789, 10794, 10795, 10830, 11104) covers data encapsulation, bellows, structural components, lunar simulants, programme-management information, materials/parts/processes, vocabulary, graphite NDT and time codes. Earth-moving machinery (10261, 10262, 10567, 10570, 10968, 10987) covers product identification, operator guards, lift capacity, articulated-frame locks, operator controls and sustainability. Hydraulic fluid power (10762, 10766, 10771-1, 10946) covers cylinder mounting dimensions, rectangular-section bearing rings, fatigue pressure and accumulators. Non-destructive testing (10332, 10810, 10878, 10880, 10830) covers steel-tube ultrasonic, XPS, thermography vocabulary, thermographic testing and graphite ultrasonic. Sensory analysis (10399, 11037, 11056, 11132, 11136) covers duo-trio test, colour assessment, magnitude estimation, quantitative panel performance and consumer testing. Ski equipment (10958, 11087, 11088, 11110) covers snowboard binding-mounting areas, binding retention devices, ski/binding/boot assembly and test devices. Road vehicles (10392, 10597, 11026, 11096) covers centre of gravity, fixing nuts, rollover and pedestrian protection. Sterilisation (11140-5) covers Class 2 chemical indicators.
3. Representative Standards — Technical Points
3.1 BS ISO 10474 — Steel and steel products inspection documents
BS ISO 10474:2013 specifies the types and content requirements of inspection documents for steel and steel products, the foundation of steel-product delivery documentation. It defines inspection-document types (e.g. 2.1, 2.2, 3.1, 3.2 certificates), document content (chemical composition, mechanical properties, inspection body, witness and signature) and the responsibilities of purchasers and manufacturers — widely used for steel procurement, acceptance and quality traceability, consistent with EN 10204.
3.2 BS ISO 10810 — Surface chemical analysis X-ray photoelectron spectroscopy
BS ISO 10810:2010 specifies general requirements and guidance for X-ray photoelectron spectroscopy (XPS) analysis, a foundational standard in surface analysis. It covers instrument calibration, sample preparation, spectral acquisition, peak identification, quantification and reporting requirements — used for surface chemical composition and chemical-state analysis of metals, semiconductors, polymers and catalysts.
3.3 BS ISO 11096 — Road-vehicle pedestrian protection impact test
BS ISO 11096:2011 specifies pedestrian thigh, leg and knee impact test methods for vehicle–pedestrian collisions, a supporting standard for vehicle pedestrian-protection regulations (e.g. UN ECE R127, GB/T 24550). It specifies impactors (thigh, lower leg, knee), test speed, impact angle and biomechanical criteria — used to evaluate the injury risk of the front bumper and leading edge to pedestrians.
3.4 BS ISO 10815 — Vibration measurement in railway tunnels
BS ISO 10815:2016 specifies the measurement of vibration generated internally in railway tunnels by passing trains, a base standard for rail environmental-vibration assessment. It specifies measurement points (tunnel wall, track bed), instrumentation, data acquisition and analysis (acceleration, velocity, frequency band) requirements — used to assess the impact of metro and rail tunnel vibration on adjacent buildings and residents.
3.5 BS ISO 10668 — Monetary brand valuation
BS ISO 10668:2010 specifies the requirements for monetary brand valuation, the international benchmark standard for brand asset valuation. It specifies valuation purpose, valuation approaches (income, market, cost), methods, data sources, discount rate and sensitivity analysis, and reporting requirements — widely used for brand valuation, M&A, licensing and financial reporting.
4. Engineering Practice and Application
This batch supports practice across many fields. Steel trade uses 10474 for inspection-document issue and acceptance; surface analysis uses 10810 for XPS and 11039 for scanning-probe drift calibration; vehicle safety uses 11096 for pedestrian protection and 11026 for rollover tests; rail uses 10815 for tunnel vibration; brand assets use 10668 for valuation; hydraulic systems use 10771-1 for pressure-envelope fatigue tests; LNG uses 10976 for shipboard cargo measurement; sterilisation uses 11140-5 for Bowie-Dick indicators; ITS uses 10711 and 11067 for signal-control and intersection safety; seismic regions use 11031 for crane seismic design. Users should follow the current official BSI edition.
Appendix — Full Standard List
The table below lists all 150 single-file BS ISO standards in this batch, in numerical order, with standard number and title.
| Standard | Title |
|---|---|
| BS ISO 10216:2010 | BS ISO 10216 |
| BS ISO 10225:2013 | BS ISO 10225:2013 Gas welding equipment — Marking for equipment used for gas welding, cutting and allied processes |
| BS ISO 10227:1997 | BS ISO Implementation of ISO 10227:1996 Human/human surrogate impact and evaluation — Guidance on technical aspects |
| BS ISO 10228:2011 | BS ISO 10228:2011 Cross-country skis — Binding mounting area — Requirements for test screws |
| BS ISO 10242-1:2011 | BS ISO 10242-1:2011 Tools for pressing — Punch holder shanks Part 1: Type A |
| BS ISO 10251:2006 | BS ISO Copper, lead, zinc and nickel concentrates — Determination of mass loss of bulk material on drying |
| BS ISO 10254:2016 | BS ISO 10254:2016 Air cargo and ground equipment — Vocabulary |
| BS ISO 10256-5:2017 | B S I S O P ro t e c t i v e e q u i p m e n t f o r u s e i n i c e h o c k e y P a r t N e c k l a c e r a t i o n p ro t e c t o r s f o r i c e h o c k e y p l a y e r s B S I S t a n d a r d s P u b l i c a t i o n B S I S O B R I T I S H S T A N D A R D N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O T o g e t h e r w i t h B S E N I S O B S E N I S O B S E N I S O B S E N I S O a n d B S E N I S O i t s u p e r s e d e s B S E N I S O w h i c h w i l l b e w i t h d r a w n u p o n p u b l i c a t i o n o f a l l p a r t s o f t h i s s t a n d a r d T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e S W / S p o r t s p l a y g r o u n d a n d o t h e r r e c r e a t i o n a l e q u i p m e n t A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a rd c a n n o t c o n f e r i m m u n i t y f ro m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a ff e c t e d B S I S O I S O P ro t e c t i v e e q u i p m e n t f o r u s e i n i c e h o c k e y P a r t N e c k l a c e ra t i o n p ro t e c t o r s f o r i c e h o c k e y p l ay e r s q u ip e m e n t p r o t e ct if d e st in e s r e u t il isé e s e n h o c k e y su r g l a c e P a r t ie P r o t g e c o u s c o n t r e le s l a c r a t io n s p o u r j o u e u r s d e h o c k e y su r g l a c e I N T E R N A T I O N A L S T A N D A R D I S O F i r s t e d i ti o n R e f e r e n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e |
| BS ISO 10258:2015 | BS ISO 10258:2015 Copper sulfide concentrates content — Titrimetric methods |
| BS ISO 10260:1992 | BS ISO 10260:1992 Water quality — Measurement of biochemical parameters — Spectrometric determination of the chlorophyll-a concentration |
| BS ISO 10261:2002 | Earth-moving machinery — Product identification numbering system |
| BS ISO 10262:1998 | BS ISO 10262:1998 Earth-moving machinery performance requirements for operator protective guards |
| BS ISO 10265:2008 | BS ISO 10265 |
| BS ISO 10276:2010 | BS ISO 10276:2010 Nuclear energy — Fuel technology — Trunnions for packages used to transport radioactive material |
| BS ISO 10285:2007 | BS ISO Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances BS ISO BS ISO August 2015 Amendments/corrigenda issued since publication Date Comments Implementation of ISO amendment 1:2012: Table A.1 replaced Implementation of ISO corrected text 1 November 2013: Footnote f in Table A.1 updated |
| BS ISO 10298:2010 | BS ISO 10298 |
| BS ISO 10312:1995 | BS ISO 10312 |
| BS ISO 10315:2013 | BS ISO 10315:2013 Cigarettes — Determination of nicotine in smoke condensates method |
| BS ISO 10317:2008 | BS ISO 10317 |
| BS ISO 10327:2014 | BS ISO 10327:2014 Air cargo — Main deck containers — Design and testing |
| BS ISO 10332:2010 | BS ISO 10332:2010 Non-destructive testing of steel tubes — Automated ultrasonic testing of seamless and welded steel tubes for verification of hydraulic leak-tightness |
| BS ISO 10348:1993 | BS ISO 10348 |
| BS ISO 10361:2015 | BS ISO 10361:2015 Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester |
| BS ISO 10376:2011 | BS ISO 10376:2011 Pulps — Determination of mass fraction of fines |
| BS ISO 10378:2016 | BS ISO 10378:2016 Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method |
| BS ISO 10383:2012 | BS ISO 10383:2012 Securities and related financial instruments — Codes for exchanges and market identification (MIC) |
| BS ISO 10390:2005 | BS ISO Soil quality — Determination of pH |
| BS ISO 10392:2011 | BS ISO 10392:2011 Road vehicles — Determination of centre of gravity |
| BS ISO 10396:2007 | BS ISO Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| BS ISO 10399:2004 | BS ISO Sensory analysis — Methodology — Duo-trio test |
| BS ISO 10425:2003 | BS ISO Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance |
| BS ISO 10457:1991 | BS ISO 10457 |
| BS ISO 10458:1993 | BS ISO 10458 |
| BS ISO 10459:1992 | BS ISO 10459 |
| BS ISO 10469:2006 | BS ISO Copper sulfide concentrates — Determination of copper — Electrogravimetric method |
| BS ISO 10474:2013 | BS ISO 10474:2013 Steel and steel products — Inspection documents |
| BS ISO 10494:1993 | HPLWWHG DLUERUQH EHHQ SUHSDUHG XQGHU WKH LQWR HIIHFW RQ PRQLWRU UHODWHG LQWHUQDWLRQDO DQG (XURSHDQ GHYHORSPHQWV DQG BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS ISO 10494:1993 BS |
| BS ISO 10502:2012 | BS ISO 10502:2012 Aerospace — Hose assemblies in polytetrafluoroethylene and 10 500 kPa — Technical specifications and requirements |
| BS ISO 10505:2009 | BS ISO 10505 |
| BS ISO 10509:2012 | Hexagon flange head tapping screws |
| BS ISO 10526:1999 | CIE standard illuininants for coloriinetry res 17.180.20 BSISO |
| BS ISO 10531:1992 | BS ISO 10531 |
| BS ISO 10537:2016 | BS ISO 10537:2016 Space data and information transfer systems — Encapsulation service |
| BS ISO 10540-3:2002 | BS ISO 10540 |
| BS ISO 10550:1994 | BS ISO 10550 |
| BS ISO 10552:2014 | BS ISO 10552:2014 Timekeeping instruments — Crowns and sealed tubes — Designs and dimensions |
| BS ISO 10553:2003 | BS ISO 10553 |
| BS ISO 10555-6:2015 | BS ISO 10555-6:2015 Intravascular catheters — Sterile and single-use catheters Part 6: Subcutaneous implanted ports |
| BS ISO 10567:2007 | BS ISO 10567:2007 Earth-moving machinery — Hydraulic excavators — Lift capacity |
| BS ISO 10570:2004 | BS ISO 10570:2004 Earth-moving machinery — Articulated frame lock — Performance requirements |
| BS ISO 10571:2016 | BS ISO 10571:2016 Tyres for mobile cranes and similar specialized machines |
| BS ISO 10575:2012 | BS ISO 10575:2012 Resilient floor coverings — Specification for rubber sheet floor coverings with backing |
| BS ISO 10577:2012 | BS ISO 10577:2012 Resilient floor coverings sheet floor coverings without backing |
| BS ISO 10579:2010 | BS ISO 10579:2010 Geometrical product specifications (GPS) — Dimensioning and tolerancing |
| BS ISO 10597:2012 | Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods |
| BS ISO 10605:2008 | BS ISO 10605 |
| BS ISO 10617:2010 | BS ISO 10617:2010 Textiles — Standard data format for colorimetric communication — Textiles and related measurements |
| BS ISO 10619-3:2011 | BS ISO 10619-3:2011 Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness Part 3: Bending tests at high and low temperatures |
| BS ISO 10627-2:1996 | BS ISO 10627 |
| BS ISO 10631:2013 | BS ISO 10631:2013 Metallic butterfly valves for general purposes |
| BS ISO 10636:1994 | BS ISO 10636 |
| BS ISO 10638:2010 | BS ISO 10638:2010 Rubber — Identification of antidegradants by gas chromatography/mass spectrometry |
| BS ISO 10653:1993 | BS ISO 10653 |
| BS ISO 10654:1993 | BS ISO 10654 |
| BS ISO 10656:2016 | BS ISO 10656:2016 Resistance welding equipment transformers for welding guns |
| BS ISO 10663:2012 | BS ISO 10663:2012 Hexagon nuts with flange, style 2 — Fine pitch thread |
| BS ISO 10668:2010 | BS ISO 10668:2010 Brand valuation — Requirements for monetary brand valuation |
| BS ISO 10676:2010 | BS ISO 10676:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen |
| BS ISO 10677:2011 | BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials |
| BS ISO 10678:2010 | BS ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue |
| BS ISO 10704:2009 | BS ISO 10704 |
| BS ISO 10711:2012 | BS ISO 10711:2012 Intelligent Transport Systems Message Set Definition between Traffic Signal Controllers and Detectors |
| BS ISO 10713:1992 | BS ISO 10713 |
| BS ISO 10716:1994 | BS ISO 10716 |
| BS ISO 10718:2015 | BS ISO 10718:2015 Cork stoppers — Characterization of a low- in-germs stopper, through the enumeration of colony- forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium |
| BS ISO 10724-1:1998 | BS ISO 10724 |
| BS ISO 10725:2000 | BS ISO 10725 |
| BS ISO 10727:2002 | BS ISO Tea and instant tea in solid form — Determination of caffeine content — Method using high-performance liquid chromatography |
| BS ISO 10762:2015 | BS ISO 10762:2015 Hydraulic fluid power — Mounting dimensions for cylinders, 10 MPa (100 bar) series |
| BS ISO 10766:2014 | BS ISO 10766:2014 Hydraulic fluid power dimensions for rectangular- section-cut bearing rings for pistons and rods |
| BS ISO 10771-1:2015 | BS ISO 10771-1:2015 Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes Part 1: Test method |
| BS ISO 10775:2013 | BS ISO 10775:2013 Paper, board and pulps — Determination of cadmium content — Atomic absorption spectrometric method |
| BS ISO 10785:2011 | BS ISO 10785:2011 Space systems — Bellows |
| BS ISO 10786:2011 | BS ISO 10786:2011 Space systems — Structural components and assemblies |
| BS ISO 10788:2014 | BS ISO 10788:2014 Space systems — Lunar simulants |
| BS ISO 10789:2011 | BS ISO 10789:2011 Space systems — Programme management — Information and documentation management |
| BS ISO 10790:2015 | BS ISO 10790:2015 Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis flowmeters flow measurements) |
| BS ISO 10794:2011 | BS ISO 10794:2011 Space systems — Programme management — Material, mechanical parts and processes |
| BS ISO 10795:2011 | BS ISO 10795:2011 Space systems — Programme management and quality — Vocabulary |
| BS ISO 10803:2011 | BS ISO 10803:2011 Design method for ductile iron pipes |
| BS ISO 10804:2010 | BS ISO 10804:2010 Restrained joint systems for ductile iron pipelines — Design rules and type testing |
| BS ISO 10810:2010 | BS ISO 10810:2010 Surface chemical analysis — X- ray photoelectron spectroscopy |
| BS ISO 10813-1:2004 | BS ISO Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing |
| BS ISO 10815:2016 | BS ISO 10815:2016 Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains |
| BS ISO 10817-1:1998 | BS ISO Rotating shaft vibration measuring systems — Part 1: Relative and absolute sensing of radial vibration |
| BS ISO 10830:2011 | BS ISO 10830:2011 Space systems — Non- destructive testing — Automatic ultrasonic inspection method of graphite ingot for solid rocket motors |
| BS ISO 10835:2007 | BS ISO Direct reduced iron and hot briquetted iron — Sampling and sample preparation |
| BS ISO 10844:2014 | BS ISO 10844:2014 Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres |
| BS ISO 10869:2010 | BS ISO 10869:2010 Oil of fir needle, Siberian |
| BS ISO 10872:2010 | BS ISO 10872 |
| BS ISO 10878:2013 | BS ISO 10878:2013 Non-destructive testing — Infrared thermography — Vocabulary |
| BS ISO 10880:2017 | BS ISO 10880:2017 Non-destructive testing — Infrared thermographic testing |
| BS ISO 10897:2016 | BS ISO 10897:2016 Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts |
| BS ISO 10898:2016 | BS ISO 10898:2016 Spot drills |
| BS ISO 10904:2011 | BS ISO 10904:2011 Fibre-cement corrugated sheets and fittings for roofing and cladding |
| BS ISO 10916:2014 | BS ISO 10916:2014 Calculation of the impact of daylight utilization on the net and final energy demand for lighting |
| BS ISO 10928:2016 | BS ISO 10928:2016 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings analysis and their use |
| BS ISO 10932:2010 | BS ISO 10932:2010 Milk and milk products — Determination of the minimal inhibitory concentration to bifidobacteria and non- enterococcal lactic acid bacteria |
| BS ISO 10935:2009 | BS ISO 10935 |
| BS ISO 10945:1994 | BS ISO 10945 |
| BS ISO 10946:1999 | BS ISO Hydraulic fluid power — Gas-loaded accumulators with separator — Selection of preferred hydraulic ports |
| BS ISO 10952:2014 | BS ISO 10952:2014 Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings resistance to chemical attack for the inside of a section in a deflected condition |
| BS ISO 10957:2009 | BS ISO 10957 |
| BS ISO 10958-2:2015 | BS ISO 10958-2:2015 Snowboards — Binding mounting area Part 2: Requirements and test methods for snowboards with inserts |
| BS ISO 10959:2016 | BS ISO 10959:2016 Aerospace — MJ threads — Gauging |
| BS ISO 10961:2010 | BS ISO 10961:2010 Gas cylinders — Cylinder bundles — Design, manufacture, testing and inspection |
| BS ISO 10962:2015 | BS ISO 10962:2015 Securities and related financial instruments — Classification of financial instruments (CFI code) |
| BS ISO 10965:2011 | BS ISO 10965:2011 Textile floor coverings electrical resistance |
| BS ISO 10966:2011 | BS ISO 10966:2011 Sports and recreational equipment — Fabrics for awnings — Specification |
| BS ISO 10968:2004 | BS ISO 10968:2004 Earth-moving machinery — Operator’s controls |
| BS ISO 10976:2015 | BS ISO 10976:2015 Refrigerated light hydrocarbon fluids — Measurement of cargoes on board LNG carriers |
| BS ISO 10987:2012 | BS ISO 10987:2012 Earth-moving machinery — Sustainability — Terminology, sustainability factors and reporting |
| BS ISO 10988:2011 | BS ISO 10988:2011 Equipment for crop protection air-assisted sprayers — Test methods and performance limits |
| BS ISO 10998:2008 | BS ISO Agricultural tractors — Requirements for steering |
| BS ISO 11005:2010 | BS ISO 11005:2010 Technical product documentation — Use of main documents |
| BS ISO 11021:1999 | BS ISO Essential Oils — Determination of water content — Karl Fischer method |
| BS ISO 11023:1999 | BS ISO Liquorice extracts glabra L.) — Determination of glycyrrhizic acid content — Method using high-performance liquid chromatography |
| BS ISO 11026:2010 | BS ISO 11026:2010 Heavy commercial vehicles and buses — Test method for roll stability — Closing-curve test |
| BS ISO 11031:2016 | BS ISO 11031:2016 Cranes — Principles for seismically resistant design |
| BS ISO 11037:2011 | BS ISO 11037:2011 Sensory analysis — Guidelines for sensory assessment of the colour of products |
| BS ISO 11039:2012 | BS ISO 11039:2012 Surface chemical analysis — Scanning-probe microscopy — Measurement of drift rate |
| BS ISO 11041:1996 | BS ISO Implementation of ISO 11041:1996 Workplace air — Determination of particulate arsenic and arsenic compounds and arsenic trioxide vapour — Method by hydride generation and atomic absorption spectrometry |
| BS ISO 11056:1999 | BS ISO Sensory analysis — Methodology — Magnitude estimation method BS ISO Amendments/corrigenda issued since publication Date Comments Implementation of ISO amendment 1:2013: last line of Subclause 7.3 modified Implementation of ISO amendment 2:2015: data modified in Table A.6 |
| BS ISO 11057:2011 | BS ISO 11057:2011 Air quality — Test method for filtration characterization of cleanable filter media |
| BS ISO 11067:2015 | BS ISO 11067:2015 Intelligent transport systems systems (CSWS) — Performance requirements and test procedures |
| BS ISO 11076:2012 | BS ISO 11076:2012 Aircraft — De-icing/anti-icing methods on the ground |
| BS ISO 11077:2014 | BS ISO 11077:2014 Aircraft ground equipment |
| BS ISO 11086:1996 | BS ISO 11086 |
| BS ISO 11087:2015 | BS ISO 11087:2015 Alpine ski-bindings — Retention devices — Requirements and test methods |
| BS ISO 11088:2015 | BS ISO 11088:2015 Assembly, adjustment and inspection of an alpine ski/ binding/boot (S-B-B) system |
| BS ISO 11095:1996 | BS ISO Implementation of ISO 11095:1996 Linear calibration using reference materials |
| BS ISO 11096:2011 | BS ISO 11096:2011 Road vehicles — Pedestrian protection — Impact test method for pedestrian thigh, leg and knee |
| BS ISO 11104:2011 | BS ISO 11104:2011 Space data and information transfer systems — Time code formats |
| BS ISO 11108:1996 | BS ISO 11108 |
| BS ISO 11110:2015 | BS ISO 11110:2015 Winter-sports equipment — Test devices for the setting of the functional unit ski/boot/ binding — Requirements and tests |
| BS ISO 11119-4:2016 | BS ISO 11119-4:2016 Gas cylinders — Refillable composite gas cylinders — Design, construction and testing Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners |
| BS ISO 11132:2012 | Sensory analysis — Methodology — Guidelines for monitoring the performance of a quantitative sensory panel |
| BS ISO 11136:2014 | BS ISO 11136:2014 Sensory analysis — Methodology — General guidance for conducting hedonic tests with consumers in a controlled area |
| BS ISO 11140-5:2007 | BS ISO Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| BS ISO 11155-2:2009 | BS ISO 11155 |
Frequently Asked Questions
What main fields does this batch cover?
This batch is the 150 independent standards from BS ISO 10216 to BS ISO 11155, spanning space systems, earth-moving machinery, hydraulic power, NDT, sensory analysis, ski equipment, road-vehicle safety, steel inspection, ITS and sterilisation.
This batch is the 150 independent standards from BS ISO 10216 to BS ISO 11155, spanning space systems, earth-moving machinery, hydraulic power, NDT, sensory analysis, ski equipment, road-vehicle safety, steel inspection, ITS and sterilisation.
What is the role of the steel inspection document standard (10474)?
BS ISO 10474:2013 specifies inspection-document types and content such as 3.1/3.2 certificates for steel acceptance and traceability.
BS ISO 10474:2013 specifies inspection-document types and content such as 3.1/3.2 certificates for steel acceptance and traceability.
What is the purpose of the XPS surface analysis standard (10810)?
BS ISO 10810:2010 specifies general requirements for X-ray photoelectron spectroscopy for surface composition and chemical-state analysis.
BS ISO 10810:2010 specifies general requirements for X-ray photoelectron spectroscopy for surface composition and chemical-state analysis.
What is the significance of the pedestrian protection impact test (11096)?
BS ISO 11096:2011 specifies pedestrian thigh/leg/knee impact tests, a supporting standard for vehicle pedestrian-protection regulations.
BS ISO 11096:2011 specifies pedestrian thigh/leg/knee impact tests, a supporting standard for vehicle pedestrian-protection regulations.
Why is the brand valuation standard (10668) important?
BS ISO 10668:2010 specifies requirements for monetary brand valuation, widely used for brand valuation, M&A and financial reporting.
BS ISO 10668:2010 specifies requirements for monetary brand valuation, widely used for brand valuation, M&A and financial reporting.
⚠️ Multiple scan editions occur in this batch (e.g. 10312, 10348, 10457–10459, 10531, 10540, 10550, 10553, 10627, 10636, 10653, 10654, 10713, 10716, 10724, 10725, 10872, 10935, 10945, 10957, 11086); their content is written from public-domain knowledge in the field, and the authoritative text is the official BSI edition.