Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO·PART4 — BS ISO Standards Single-File Series Overview · Batch 4 — A Compilation of 150 International Standards (ISO) and Their Technical Points
This review covers 150 single-file ISO standards from BS ISO 4942 to BS ISO 6914, systematically summarising steel castings and strip, brown coal and hard coal analysis, agricultural tractors and machinery, hydraulic and pneumatic power, surgical implants, instrument bearings, piston rings, road-vehicle impact tests and meteorology.
This review covers Batch 4 of the BS ISO single-file series, bringing together 150 independent International Standards (ISO) from BS ISO 4942 to BS ISO 6914. The batch spans steel metallurgy, coal quality analysis, agricultural machinery, hydraulic and pneumatic power, medical devices, internal combustion engines, road-vehicle safety, aerospace, meteorological observation and horology.
💡 This batch includes the steel casting series (4990–4993), the brown-coal analysis series (5071–5074), the tractor safety-structure series (5700, 5702, 5715, 5718), the surgical implant series (5834, 5838, 5841, 6474) and the reaction-to-fire test series (5658, 5660). Numerical values should be checked against the current official BSI edition.
1. Series Overview 📌
This batch covers the continuous range BS ISO 4942 to BS ISO 6914. Clusters: 4942–5053 belong to steel vanadium, steel castings, coated steel strip, earth-moving machinery, engine inlet-air cleaners and industrial-truck terminology; 5071–5131 belong to brown-coal and hard-coal analysis, sensory-analysis vocabulary, aircraft and stationary-vehicle noise, tractor operator noise and cylinder valve outlets; 5145–5433 belong to cylinder valve outlets, air conditioners and heat pumps, flow-measurement uncertainty, industrial-valve pressure testing, conveyor belt storage, belt-drive pulleys, synchronous belts, electrodynamic vibration generators, accelerometer mounting, coated-abrasive flap wheels and wet-blue leather; 5468–5718 belong to carbide-tipped masonry drills, cargo-ship guardrails, ships, hydraulic cylinder seal housings, rubber conical adhesion, rubber cord adhesion, turning tool holders, board bending stiffness, reaction-to-fire tests, crop-protection machinery, tractor roll-over protective structures, harvesting machinery and rotary-mower blades; 5745–6266 belong to pliers, rolling-bearing radial clearance, fuel-metering hoses, proof-correction symbols, hydraulic valves, UHMWPE, surgical implants, pacemakers, aerospace hydraulic symbols, building rubber gaskets, testing equipment, alpine skis, electrode pitch, tin-coated strip, weathering steel, essential-oil distillation residue, hydraulic excavators, hydraulic-oil compatibility, superabrasive grain size, rubber tear multi-peak analysis, dynamic calibration-gas preparation, securities ISIN, hydraulic rod wiper seals, raw-rubber polystyrene content, climatic-data symbols, boring-bar holders, flow-control valves, ski fatigue and plain-bearing aluminium alloys; 6279–6539 belong to plain bearings, petroleum water, brake linings, coated-abrasive grain analysis, textile floor coverings, horological vocabulary, pneumatic cylinders, bridge rubber bearings, end milling cutters, rubber-compounding abbreviations, ceramic implants, impact-test instrumentation, tobacco moisture, feed chlorides, curemeters, rubber metal corrosion, air-cargo containers, injection-pump tapers, forestry chain-saws and cinnamon; 6565–6914 belong to tobacco pressure drop, hydraulic hose tests, piston rings, rice milling yield, coffee sampling, cycle cranks, motorcycle indicators, dairy total solids, dozers, operator manuals, mould ejector pins, ambient nitrogen dioxide, aerospace hydraulic impulse, IC-engine noise, washing-machine hoses, photographic effluent and rubber stress relaxation.
2. Series Composition and Main Standards
This batch has several large clusters. Steel castings and strip (4942, 4990–4993, 4997–4999, 5950, 5952) covers vanadium determination, general delivery of castings, pressure castings, ultrasonic and radiographic testing, structural cold-reduced strip, hot-dip zinc-coated strip, tin-coated strip, terne-coated strip and weathering hot-rolled strip. Coal analysis (5071-1, 5072, 5073, 5074) covers brown-coal volatile matter, true/apparent relative density, humic acids and Hardgrove grindability. Agricultural machinery (5006, 5053-1, 5131, 5682, 5700, 5702, 5715, 5718, 6015, 6016, 6531, 6533, 6534, 6535, 6747, 6750) covers earth-moving visibility, industrial trucks, tractor noise, crop-protection spraying, ROPS, harvesting machinery, mower blades, excavators, dozers and chain-saws. Hydraulic and pneumatic power (5597, 5781, 6195, 6263, 6431, 6432, 6605) covers seal housings, pressure valves, wiper-ring housings, flow-control valves and pneumatic cylinders. Surgical implants (5834-2, 5838-1, 5841-2, 6474-2) covers UHMWPE, metallic pins and wires, cardiac pacemakers and alumina-matrix ceramic composites. Internal combustion engines (6622-2, 6623, 6626-2, 6627, 6519, 6798) covers piston rings and injection pumps. Vehicle and aerospace (6487, 6772, 6727, 6312) covers impact-test instrumentation, aerospace hydraulic impulse, motorcycle tell-tales and brake linings.
3. Representative Standards — Technical Points
3.1 BS ISO 4990 — Steel castings general technical delivery
BS ISO 4990:2015 specifies general technical delivery requirements for steel castings, the base standard for procurement and inspection of pressure and non-pressure castings. It covers material selection, chemical composition, mechanical properties, heat treatment, surface quality, NDT, dimensional tolerances, marking and inspection documents, supported by 4991 (pressure castings), 4992 (ultrasonic) and 4993 (radiography) — widely used for valves, pump bodies, mining and marine castings.
3.2 BS ISO 5074 — Hardgrove grindability index of hard coal
BS ISO 5074:2015 specifies the determination of the Hardgrove grindability index (HGI) of hard coal, a key standard for evaluating pulverising energy and mill selection. It specifies the Hardgrove mill, calibration with reference coals, 50 g sample preparation, 60-revolution grinding, sieving/weighing and index calculation — a fundamental test for coal-quality management in power plants and coking plants.
3.3 BS ISO 5700 — Tractor roll-over protective structure static test
BS ISO 5700:2013 specifies the static test method and acceptance criteria for roll-over protective structures (ROPS) on agricultural and forestry tractors, the foundation of tractor safety design. It specifies load application sequences (longitudinal, lateral, vertical), energy-absorption requirements, deflection-limiting volume (DLV) and structural-integrity criteria, supporting whole-tractor safety certification together with BS ISO 5131 (operator noise).
3.4 BS ISO 5660-1 — Heat release rate by cone calorimeter
BS ISO 5660-1:2015 specifies the determination of heat release rate, smoke production and mass-loss rate of materials with a cone calorimeter, the most widely used combustion test in fire science. It specifies radiant heat flux (50–100 kW/m²), specimen size, ignition mode, heat-release-rate (oxygen-consumption) calculation and reporting — used for fire-hazard evaluation of construction materials, decorative materials, cables and polymers.
3.5 BS ISO 5834-2 — Ultra-high-molecular-weight polyethylene moulded forms
BS ISO 5834-2:2011 specifies requirements and test methods for ultra-high-molecular-weight polyethylene (UHMWPE) moulded forms for surgical implants, the foundation of joint-replacement material quality. It covers material grade, density, viscosity, oxidation index, tensile properties and impact strength, and together with ISO 5834-1 (powder) is used for quality control of UHMWPE components in hip and knee prostheses.
4. Engineering Practice and Application
This batch supports practice across many fields. Foundries and metallurgy use 4990/4991 for pressure castings, 4993 for radiography and 5950 for tin-coated strip; coal and power use 5074 for HGI and 5071/5073 for brown-coal analysis; agricultural machinery uses 5700 for ROPS tests and 5682 for sprayer inspection; medical devices use 5834 and 6474 for implant materials; fire safety uses 5660-1 for heat-release evaluation; hydraulic systems use 5597/5781 for seal housings and valves; IC engines use 6622/6627 for piston rings; meteorology and environment use 6768 for nitrogen dioxide and 6879 for air-quality measurement management. Users should follow the current official BSI edition.
Appendix — Full Standard List
The table below lists all 150 single-file BS ISO standards in this batch, in numerical order, with standard number and title.
| Standard | Title |
|---|---|
| BS ISO 04942:2016 | BS ISO 4942:2016 Steels and irons — Determination of vanadium content — N-BPHA spectrophotometric method |
| BS ISO 04990:2015 | BS ISO 4990:2015 Steel castings — General technical delivery requirements |
| BS ISO 04991:2015 | BS ISO 4991:2015 Steel castings for pressure purposes |
| BS ISO 04992-2:2006 | BS ISO Steel castings — Ultrasonic examination — Part 2: Steel castings for highly stressed components |
| BS ISO 04993:2015 | BS ISO 4993:2015 Steel and iron castings — Radiographic testing |
| BS ISO 04997:2015 | BS ISO 4997:2015 Cold-reduced carbon steel sheet of structural quality |
| BS ISO 04998:2014 | BS ISO 4998:2014 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| BS ISO 04999:2014 | BS ISO 4999:2014 Continuous hot-dip terne reduced carbon steel sheet of commercial, drawing and structural qualities |
| BS ISO 05006:2006 | BS ISO June 2008 Earth-moving machinery — view — Test method and performance criteria |
| BS ISO 05011:2014 | BS ISO 5011:2014 Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing |
| BS ISO 05024:1999 | BS ISO 05024 |
| BS ISO 05053-1:2015 | BS ISO 5053-1:2015 Industrial trucks — Terminology and classification Part 1: Types of industrial trucks |
| BS ISO 05071-1:2013 | BS ISO 5071-1:2013 Brown coals and lignites — Determination of the volatile matter in the analysis sample Part 1: Two-furnace method |
| BS ISO 05072:2013 | BS ISO 5072:2013 Brown coals and lignites — Determination of true relative density and apparent relative density |
| BS ISO 05073:2013 | BS ISO 5073:2013 Brown coals and lignites — Determination of humic acids |
| BS ISO 05074:2015 | BS ISO 5074:2015 Hard coal — Determination of Hardgrove grindability index |
| BS ISO 05098:1992 | BS 5098:1992 ISO 5492:1992 Glossary of Terms relating to sensory analysis BS 5098:1992 |
| BS ISO 05129:2001 | Acoustics — Measurement of sound pressure levels in the interior of aircraft during flight |
| BS ISO 05130:2007 | BS ISO Acoustics — Measurements of sound pressure level emitted by stationary road vehicles |
| BS ISO 05131:2015 | BS ISO 5131:2015 Tractors for agriculture and forestry — Measurement of noise at the operator’s position |
| BS ISO 05145:2014 | BS ISO 5145:2014 Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
| BS ISO 05151:2017 | N o n d u c t e d a i r c o n d i t i o n e r s a n d h e a t p u m p s T e s t i n g a n d ra t i n g f o r p e r f o r m a n c e B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e R H E T e s t i n g o f a i r c o n d i t i o n i n g u n i t s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O N o n d u c t e d a i r c o n d i t i o n e r s a n d h e a t p u m p s T e s t i n g a n d ra t i n g f o r p e r f o r m a n c e C lim a t ise u r s e t p o m p e s c h a le u r n o n r a c c o r d s E ssa is e t d t e r m in a t io n de s c a r a ct r ist iq u e s d e p e r f o r m a n c e I N T E R N A T I O N A L S T A N D A R D I S O T h i r d e d i ti o n R e f e re n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 05168:2005 | BS ISO Measurement of fluid flow — Procedures for the evaluation of uncertainties |
| BS ISO 05208:2015 | BS ISO 5208:2015 Industrial valves — Pressure testing of metallic valves |
| BS ISO 05285:2012 | Conveyor belts — Guidelines for storage and handling |
| BS ISO 05291:2011 | BS ISO 5291:2011 Belt drives — Grooved pulleys for joined classical V-belts — Groove sections AJ, BJ, CJ and DJ (effective system) |
| BS ISO 05294:2012 | BS ISO 5294:2012 Synchronous belt drives — Pulleys |
| BS ISO 05296:2012 | Synchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and inch dimensions |
| BS ISO 05344:2004 | BS ISO Electrodynamic vibration generating systems — Performance characteristics |
| BS ISO 05348:1998 | BS ISO Mechanical vibration and shock — Mechanical mounting of accelerometers |
| BS ISO 05389:2005 | BS ISO 05389 |
| BS ISO 05408:2009 | BS ISO 05408 |
| BS ISO 05416:2006 | BS ISO 05416 |
| BS ISO 05429:2012 | BS ISO 5429:2012 Coated abrasives — Flap wheels with incorporated flanges or separate flanges |
| BS ISO 05431:2013 | BS ISO 5431:2013 Leather — Wet blue goat skins |
| BS ISO 05432:2013 | BS ISO 5432:2013 Leather — Wet blue sheep skins — Specification |
| BS ISO 05433:2013 | BS ISO 5433:2013 Leather — Bovine wet blue — Specification |
| BS ISO 05468:2017 | BS ISO 5468:2017 Rotary and rotary impact masonry drill bits with hardmetal tips — Dimensions |
| BS ISO 05480:1979 | BS ISO 5480:1979 Shipbuilding — Guardrails for cargo ships |
| BS ISO 05488:2015 | BS ISO 5488:2015 Ships and marine technology |
| BS ISO 05546:2010 | BS ISO 05546 |
| BS ISO 05597:2010 | BS ISO 5597:2010 Hydraulic fluid power — Cylinders — Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
| BS ISO 05600:2011 | BS ISO 5600:2011 Rubber — Determination of adhesion to rigid materials using conical shaped parts |
| BS ISO 05603:2011 | BS ISO 5603:2011 Rubber, vulcanized — Determination of adhesion to wire cord |
| BS ISO 05608:2012 | BS ISO 5608:2012 Turning and copying tool holders and cartridges for indexable inserts — Designation |
| BS ISO 05628:2012 | BS ISO 5628:2012 Paper and board — Determination of bending stiffness — General principles for two-point, three-point and four-point methods |
| BS ISO 05658-2:2006 | BS ISO Reaction to fire tests — Spread of flame — Part 2: Lateral spread on building and transport products in vertical configuration |
| BS ISO 05660-1:2015 | BS ISO 5660-1:2015 Reaction-to-fire tests — Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate |
| BS ISO 05682-1:2017 | E q u i p m e n t f o r c ro p p ro t e c t i o n S p rayi n g e q u i p m e n t P a r t T e s t m e th o d s f o r s p ra y e r n o z z l e s B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e A G E E q u i p m e n t f o r c r o p p r o t e c t i o n a n d a p p l i c a t i o n o f l i q u i d f e r t i l i z e r A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u n e A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O E q u i p m e n t f o r c ro p p ro t e c t i o n S p rayi n g e q u i p m e n t P a r t T e s t m e t h o d s f o r s p ray e r n o z z l e s M a t r ie l de p r o t e c t io n d e s cu lt u r e s q u ip e m e n t de p u lv r isa t io n P a r t ie M t h o d e s d e ssa i d e s b u se s d e p u l v r isa t io n I N T E R N A T I O N A L S T A N D A R D I S O T h i r d e d i ti o n R e f e re n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 05700:2013 | BS ISO 5700:2013 Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions |
| BS ISO 05702:1983 | BS ISO 5702:1983 Equipment for harvesting — Combine harvester component parts — Equivalent terms |
| BS ISO 05715:1983 | BS ISO 5715:1983 Equipment for harvesting — Dimensional compatibility of forage harvesting machinery |
| BS ISO 05718:2013 | BS ISO 5718:2013 Harvesting equipment — Blades for agricultural rotary mowers — Requirements |
| BS ISO 05745:2004 | BS ISO Pliers and nippers — Pliers for gripping and manipulating — Dimensions and test values |
| BS ISO 05753-2:2010 | BS ISO 5753-2:2010 Rolling bearings — Internal clearance Part 2: Axial internal clearance for four- point-contact ball bearings |
| BS ISO 05772:2015 | BS ISO 5772:2015 Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification |
| BS ISO 05776:2016 | BS ISO 5776:2016 Graphic technology — Symbols for text proof correction |
| BS ISO 05781:2016 | BS ISO 5781:2016 Hydraulic fluid power — Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves — Mounting surfaces |
| BS ISO 05834-2:2011 | BS ISO 5834-2:2011 Implants for surgery — Ultra-high-molecular-weight polyethylene Part 2: Moulded forms |
| BS ISO 05838-1:2013 | BS ISO 5838-1:2013 Implants for surgery — Metallic skeletal pins and wires Part 1: General requirements |
| BS ISO 05841-2:2014 | BS ISO 5841-2:2014 Implants for surgery — Cardiac pacemakers Part 2: Reporting of clinical performance of populations of pulse generators or leads |
| BS ISO 05859:2014 | BS ISO 5859:2014 Aerospace series — Graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| BS ISO 05892:2013 | BS ISO 5892:2013 Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specification |
| BS ISO 05893:2002 | BS ISO Rubber and plastics test equipment — Tensile, flexural and compression types traverse) — Specification |
| BS ISO 05902:2013 | BS ISO 5902:2013 Alpine skis — Determination of elastic properties |
| BS ISO 05940-2:2007 | BS ISO Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Part 2: Determination of the softening point (Mettler softening point method) |
| BS ISO 05950:2012 | BS ISO 5950:2012 Electrolytic tin-coated cold- reduced carbon steel sheet of commercial and drawing qualities |
| BS ISO 05952:2011 | BS ISO 5952:2011 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance |
| BS ISO 05985:2002 | BS ISO Amendments/corrigenda issued since publication Amd. No. Date Comments March 2006 Table 1 and Table A.1 replaced Implementation of ISO amendment |
| BS ISO 05991:1979 | BS ISO Essential Oils — Determination of residue content from distillation under reduced pressure BS SIO5991:1979 |
| BS ISO 06015:2006 | BS ISO 6015:2006 Earth-moving machinery — Hydraulic excavators and backhoe loaders — Methods of determining tool forces |
| BS ISO 06016:2008 | BS ISO 6016:2008 Earth-moving machinery the masses of whole machines, their equipment and components |
| BS ISO 06072:2011 | BS ISO 6072:2011 Rubber — Compatibility between hydraulic fluids and standard elastomeric materials |
| BS ISO 06073:1997 | BS ISO Petroleum products — Prediction of the bulk moduli of petroleum fluids used in hydraulic fluid power systems |
| BS ISO 06091:2010 | BS ISO 06091 |
| BS ISO 06099:2009 | BS ISO 06099 |
| BS ISO 06106:2013 | BS ISO 6106:2013 Abrasive products — Checking the grain size of superabrasives |
| BS ISO 06133:2015 | BS ISO 6133:2015 Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength |
| BS ISO 06145-2:2014 | BS ISO 6145-2:2014 Gas analysis — Preparation of calibration gas mixtures using dynamic methods Part 2: Piston pumps |
| BS ISO 06166:2013 | BS ISO 6166:2013 Securities and related financial instruments — International securities identification numbering system (ISIN) |
| BS ISO 06195:2013 | BS ISO 6195:2013 Fluid power systems and components — Cylinder- rod wiper-ring housings in reciprocating applications — Dimensions and tolerances |
| BS ISO 06209:2009 | BS ISO 06209 |
| BS ISO 06235:2016 | BS ISO 6235:2016 Rubber, raw — Determination of block polystyrene content — Ozonolysis method |
| BS ISO 06243:1997 | BS ISO Climatic data for building design — Proposed system of symbols |
| BS ISO 06261:2011 | BS ISO 6261:2011 Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation |
| BS ISO 06263:2013 | BS ISO 6263:2013 Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| BS ISO 06265:2013 | BS ISO 6265:2013 Alpine skis — Determination of deformation load and breaking load |
| BS ISO 06266:2013 | BS ISO 6266:2013 Alpine skis — Determination of fatigue indexes — Cyclic loading test |
| BS ISO 06279:2017 | BS ISO 6279:2017 Plain bearings — Aluminium alloys for solid bearings |
| BS ISO 06296:2000 | BS ISO BS Methods of test for petroleum and its products — BS 2000-439: Petroleum products — Determination of water — Potentiometric Karl Fischer titration method |
| BS ISO 06301-1:2009 | BS ISO 06301 |
| BS ISO 06310:2009 | BS ISO 06310 |
| BS ISO 06312:2010 | BS ISO 6312:2010 Road vehicles — Brake linings disc brake pad and drum brake shoe assemblies |
| BS ISO 06344-3:2013 | BS ISO 6344-3:2013 Coated abrasives — Grain size analysis Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
| BS ISO 06347:2017 | BS ISO 6347:2017 Textile floor coverings — Consumer information |
| BS ISO 06356:2012 | BS ISO 6356:2012 Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| BS ISO 06393:2008 | BS ISO 06393 |
| BS ISO 06394:2008 | BS ISO 06394 |
| BS ISO 06395:2008 | BS ISO 06395 |
| BS ISO 06396:2008 | BS ISO 06396 |
| BS ISO 06420:2016 | BS ISO 6420:2016 Hydrometry — Position fixing equipment for hydrometric boats |
| BS ISO 06421:2012 | BS ISO 6421:2012 Hydrometry — Methods for assessment of reservoir sedimentation |
| BS ISO 06426-2:2002 | BS ISO Horological vocabulary — Part 2: Technical and commercial definitions BS ISO April 2003 Amendments/corrigenda issued since publication Amd. No. Date Comments Corrections to Clause 7.6.2.5, Clause 8 and Bibliography Implementation of ISO amendment 1: text in Bibliography, modification to Alphabetical Index |
| BS ISO 06431:1992 | BS ISO Implementation of ISO 6431:1992 Pneumatic fluid power — Single rod cylinders, series, with detachable mountings, bores from 32 mm to 320 mm — Mounting dimensions UDC 621.5-222:621.8.033 |
| BS ISO 06432:2015 | BS ISO 6432:2015 Pneumatic fluid power — Single rod cylinders, 1 000 kPa mounting dimensions |
| BS ISO 06446:1994 | BS ISO Implementation of ISO 6446:1994 Rubber products — Bridge bearings — Specification for rubber materials |
| BS ISO 06462:2011 | BS ISO 6462:2011 Face and shoulder milling cutters with indexable inserts |
| BS ISO 06472:2017 | R u b b e r c o m p o u n d i n g i n g re d i e n t s A b b re vi a t e d t e r m s B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e P R I T e r m i n o l o g y f o r r u b b e r s a n d p l a s t i c s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O R u b b e r c o m p o u n d i n g i n g re d i e n t s A b b re vi a t e d t e r m s I n g r d ie n t s d e m l a n g e d u c a o u t c h o u c T e r m e s a b r g s I N T E R N A T I O N A L S T A N D A R D I S O F i f th e d i ti o n R e f e r e n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 06474-2:2012 | BS ISO 6474-2:2012 Implants for surgery — Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement |
| BS ISO 06487:2015 | BS ISO 6487:2015 Road vehicles — Measurement techniques in impact tests — Instrumentation |
| BS ISO 06488:2004 | BS ISO June 2008 Tobacco and tobacco products — Determination of water content — Karl Fischer method |
| BS ISO 06495-1:2015 | BS ISO 6495-1:2015 Animal feeding stuffs — Determination of water-soluble chlorides content Part 1: Titrimetric method |
| BS ISO 06502:2016 | BS ISO 6502:2016 Rubber — Guide to the use of curemeters |
| BS ISO 06505:2015 | Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals |
| BS ISO 06517:2013 | BS ISO 6517:2013 Air cargo — Certified lower deck containers — Design and testing |
| BS ISO 06519:2015 | BS ISO 6519:2015 Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs |
| BS ISO 06531:2017 | BS ISO 6531:2017 Machinery for forestry — Portable chain-saws — Vocabulary |
| BS ISO 06533:2012 | BS ISO 6533:2012 Forestry machinery — Portable chain-saw front hand-guard — Dimensions and clearances |
| BS ISO 06534:2007 | BS ISO Forestry machinery — Portable chain-saw hand-guards — Mechanical strength BS ISO Note ISO 6534:1992 was not adopted as a British Standard. The UK participation in its preparation was entrusted to Technical Committee AGE/29, Forestry machinery. A list of organizations represented on this committee can be obtained on request to its secretary. contract. Users are responsible for its correct application. |
| BS ISO 06535:2015 | BS ISO 6535:2015 Portable chain-saws — Chain brake performance |
| BS ISO 06539:2014 | BS ISO 6539:2014 Cinnamon (Cinnamomum zeylanicum Blume) — Specification |
| BS ISO 06565:2015 | BS ISO 6565:2015 Tobacco and tobacco products and pressure drop of filter rods measurement |
| BS ISO 06605:2017 | H y d ra u l i c f l u i d p o w e r T e s t m e t h o d s f o r h o s e s a n d h o s e a s s e m b l i e s B S I S O B S I S t a n d a r d s P u b l i c a t i o n N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e M C E C o n n e c t o r s a n d a s s o c i a t e d c o m p o n e n t s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n T h e B r i t i s h S t a n d a r d s I n s t i t u t i o n P u b l i s h e d b y B S I S t a n d a r d s L i m i t e d I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n J u l y A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O H y d ra u l i c f l u i d p o w e r T e s t m e t h o d s f o r h o s e s a n d h o s e a s s e m b l i e s T r a n sm issio n s h y dr a u l iq u e s M t h o d e s d e ssa i p o u r le s t u y a u x e t f le x ib le s I N T E R N A T I O N A L S T A N D A R D I S O T h i r d e d i ti o n R e f e re n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c t r o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s ti n g o n th e i n t e r n e t o r a n i n tra n e t w i t h o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i t h e r I S O a t th e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n t r y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S w i tz e r l a n d T e l Fa x c o p yr i g h i s o o r g www i s o o r g B S I S O I S O E F o re w o rd |
| BS ISO 06622-2:2013 | BS ISO 6622-2:2013 Internal combustion engines — Piston rings Part 2: Rectangular rings made of steel |
| BS ISO 06623:2013 | BS ISO 6623:2013 Internal combustion engines made of cast iron |
| BS ISO 06626-2:2013 | BS ISO 6626-2:2013 Internal combustion engines — Piston rings Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron |
| BS ISO 06627:2011 | BS ISO 6627:2011 Internal combustion engines segment oil-control rings |
| BS ISO 06646:2011 | BS ISO 6646:2011 Rice — Determination of the potential milling yield from paddy and from husked rice |
| BS ISO 06666:2011 | BS ISO 6666:2011 Coffee sampling — Triers for green coffee or raw coffee and parchment coffee |
| BS ISO 06695:2015 | BS ISO 6695:2015 Cycles — Pedal axle and crank assembly with square end fitting — Assembly dimensions |
| BS ISO 06699:2016 | BS ISO 6699:2016 Cycles — Handlebar centre and stem dimensions |
| BS ISO 06727:2012 | BS ISO 6727:2012 Road vehicles — Motorcycles indicators and tell-tales |
| BS ISO 06731:2010 | BS ISO 6731:2010 Milk, cream and evaporated milk — Determination of total solids content (Reference method) |
| BS ISO 06732:2010 | BS ISO 06732 |
| BS ISO 06734:2010 | BS ISO 6734:2010 Sweetened condensed milk — Determination of total solids content (Reference method) |
| BS ISO 06747:2013 | BS ISO 6747:2013 Earth-moving machinery — Dozers — Terminology and commercial specifications |
| BS ISO 06750:2005 | BS ISO 6750:2005 Earth-moving machinery — Operator’s manual — Content and format |
| BS ISO 06751:2011 | BS ISO 6751:2011 Tools for moulding — Ejector pins with cylindrical head |
| BS ISO 06768:1998 | BS ISO Ambient air — Determination of mass concentration of nitrogen dioxide — Modified Griess-Saltzman method |
| BS ISO 06772:2012 | BS ISO 6772:2012 Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| BS ISO 06798:1995 | BS ISO Implementation of ISO 6798:1995 Reciprocating internal combustion engines — Measurement of emitted airborne noise — Engineering method and survey method |
| BS ISO 06804:2016 | BS ISO 6804:2016 Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
| BS ISO 06805:1994 | BS ISO Implementation of ISO 6805:1994 Rubber hoses and hose assemblies for underground mining — Wire-reinforced hydraulic types for coal mining — Specification |
| BS ISO 06814:2009 | BS ISO 06814 |
| BS ISO 06849:1996 | BS ISO 06849 |
| BS ISO 06850:1994 | BS ISO Implementation of ISO 6850:1994 Photography — Processing wastes — Determination of nitrate by a spectrometric method using brucine |
| BS ISO 06853:2001 | BS ISO Photography — Processing waste — Determination of ammoniacal nitrogen method) |
| BS ISO 06879:1995 | BS ISO Implementation of ISO 6879:1995 Air quality — Performance characteristics and related concepts for air quality measuring methods |
| BS ISO 06892-4:2015 | BS ISO 6892-4:2015 Metallic materials — Tensile testing Part 4: Method of test in liquid helium |
| BS ISO 06914:2013 | BS ISO 6914:2013 Rubber, vulcanized or thermoplastic — Determination of ageing characteristics by measurement of stress relaxation in tension |
Frequently Asked Questions
What main fields does this batch cover?
This batch is the 150 independent standards from BS ISO 4942 to BS ISO 6914, spanning castings, coal analysis, agricultural machinery, hydraulic/pneumatic power, surgical implants, IC engines, road vehicles, aerospace and meteorology.
This batch is the 150 independent standards from BS ISO 4942 to BS ISO 6914, spanning castings, coal analysis, agricultural machinery, hydraulic/pneumatic power, surgical implants, IC engines, road vehicles, aerospace and meteorology.
What is the role of the pressure casting standard (4991)?
BS ISO 4991:2015 specifies material, inspection and testing requirements for pressure-purpose steel castings, used with 4990/4992/4993.
BS ISO 4991:2015 specifies material, inspection and testing requirements for pressure-purpose steel castings, used with 4990/4992/4993.
Where is the Hardgrove grindability index (5074) used?
BS ISO 5074:2015 measures HGI of hard coal for evaluating pulverising energy and mill selection.
BS ISO 5074:2015 measures HGI of hard coal for evaluating pulverising energy and mill selection.
Why is the tractor ROPS test (5700) important?
BS ISO 5700:2013 specifies the ROPS static test and acceptance criteria to protect the driver survival space during roll-over.
BS ISO 5700:2013 specifies the ROPS static test and acceptance criteria to protect the driver survival space during roll-over.
How is cone calorimeter data (5660-1) applied?
BS ISO 5660-1:2015 measures material heat release rate for fire-hazard classification of building materials and polymers.
BS ISO 5660-1:2015 measures material heat release rate for fire-hazard classification of building materials and polymers.
⚠️ BS ISO 5024, 5098 and 5991 in this batch are scan editions; their content is written from public-domain knowledge in the field, and the authoritative text is the official BSI edition.