Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO·PART3 — BS ISO Standards Single-File Series Overview · Batch 3 — A Compilation of 150 International Standards (ISO) and Their Technical Points
This review covers 150 single-file ISO standards from BS ISO 3467 to BS ISO 4939, systematically summarising road-vehicle safety glazing, cranes, essential oils, rubber evaluation, iron ore and steel analysis, hydraulic fluid power, hydrometry, ship windows and winches, currency codes and laboratory glassware.
This review covers Batch 3 of the BS ISO single-file series, bringing together 150 independent International Standards (ISO) from BS ISO 3467 to BS ISO 4939. Spanning the intersection of machinery, materials and vehicle safety, it focuses on road-vehicle safety glazing, cranes, essential oils, rubber evaluation, iron-ore and steel analysis, hydraulic fluid power, hydrometry, ship windows and winches, currency codes, laboratory glassware and sensory analysis.
💡 This batch includes the road-vehicle safety glazing series (3536, 3537, 3917), the crane series (4301-1, 4302, 4305, 4309), the iron-ore reducibility and strength series (4695, 4698, 4700, 3852) and a complete essential-oil chemical evaluation series. Numerical values should be checked against the current official BSI edition.
1. Series Overview 📌
This batch covers the continuous range BS ISO 3467 to BS ISO 4939. Clusters: 3467–3862 belong to taper-pin reamers, car demisting, laboratory glassware, essential oils, vacuum technology, road-vehicle safety glazing, galvanised steel sheet, textile glass, tractor operator manuals, packaging unit loads, black tea, hydraulic filter elements, ship mooring winches, time-measuring instruments, petroleum base number, wet-strength paper, iron-ore bulk density and compressor vocabulary; 3867–4229 belong to composition-cork expansion fillers, container handling, centreless grinders, milk-fat flasks, road-vehicle rims, ship windows, coated abrasives, vehicle exhaust, hydraulic filter differential pressure, sensory analysis, grease sulfated ash, radiation protection, thermoplastic pipe wall thickness, rubber hoses, EPDM evaluation, motorcycles, air cargo, triangle test, vehicle tell-tales, steady-state circular driving, coffee size analysis, flange hexagon nuts, flange hexagon bolts, heat-resistant conveyor belts, reduction sleeves, counterbores and tyres/rims; 4241–4477 belong to projection leaders, motorcycle tyres, turbine oils, tank calibration, cranes, leaf chains, flow measurement structures, sediment measurement, echo sounders, flat-V weirs, plain bearings, hydraulic cylinders, hydraulic fluid contamination, ship windlasses, textile-glass fabrics, rubber adhesion, rubber abrasion, carbon black oil absorption, SBR evaluation, natural-rubber colour index, rubber dynamic properties and iron-ore aluminium; 4688–4939 belong to iron-ore aluminium, reducibility, pellet free-swelling, crushing strength, composition-cork gaskets, essential-oil residue, vetiver, lemongrass, lavender, cedarwood, tea tree, geranium, cardamom, metal wire screens, laboratory glassware, food coliforms, mechanical vibration, textile-glass mats, unsaturated-polyester styrene, carpet tuft withdrawal, non-petroleum brake fluids and steel nickel.
2. Series Composition and Main Standards
This batch has several large clusters. Road-vehicle safety glazing (3536, 3537, 3917) covers glazing terminology, mechanical tests (impact, penetration resistance, fragmentation) and resistance to radiation, high temperature, humidity and temperature change. Cranes (4301-1, 4302, 4305, 4309) covers crane classification, wind-load assessment, mobile-crane stability and wire-rope care, maintenance, inspection and discard. Essential oils (3517, 3519, 3526, 3527, 3528, 3793, 3794, 3809, 3848, 3849, 4096, 4715–4733) covers neroli, litsea, sage, parsley, mandarin, free alcohols, lemongrass, citronella, cedarwood, tea tree, geranium and cardamom. Rubber (4079, 4081, 4097, 4195, 4647, 4649, 4650, 4652, 4656, 4659, 4660, 4664, 4665) covers hoses, EPDM, heat-resistant conveyor belts, fabric adhesion, abrasion, infrared identification, carbon black, SBR, natural-rubber colour index, dynamic properties and weathering. Iron ore and steel (3852, 4691, 4695, 4698, 4700, 4888, 4939) covers bulk density, aluminium, reducibility, free swelling, crushing strength, aluminium and nickel. Hydraulic fluid power (3723, 3943, 3968, 4407, 4409) covers filter-element end-load tests, differential-pressure/flow characteristics, particle contamination counting and positive-displacement pump/motor tests. Hydrometry (3846, 4359, 4360, 4365, 4366, 4377) covers broad-crested weirs, U-shaped flumes, triangular-profile weirs, sediment measurement, echo sounders and flat-V weirs.
3. Representative Standards — Technical Points
3.1 BS ISO 3537 — Road vehicles safety glazing mechanical tests
BS ISO 3537:2015 specifies mechanical test methods for road-vehicle safety glazing materials, the core standard for automotive windscreen and side-window safety. It specifies drop-ball impact, penetration resistance, fragmentation and pellet-impact tests, paired with BS ISO 3917 (resistance to radiation, high temperature, humidity and temperature change) and BS ISO 3536 (terminology), forming the type-approval system for automotive glazing referenced by UN ECE R43 and similar regulations.
3.2 BS ISO 4309 — Crane wire ropes care, maintenance, inspection and discard
BS ISO 4309:2010 specifies the care, maintenance, inspection and discard criteria for crane wire ropes, an important standard for crane safe operation. It specifies inspection periods, visual inspection, broken-wire counts, wear, corrosion, deformation and discard criteria, with tables of permissible broken wires by rope diameter and lay — used to ensure the safe operation of crane hoist ropes.
3.3 BS ISO 4695 — Reducibility of iron ores for blast-furnace feedstocks
BS ISO 4695:2015 specifies the determination of reducibility of iron ores for blast-furnace feedstocks (by the rate-of-reduction index), a key test for evaluating iron-ore reducibility. It specifies reducing-gas composition, temperature, reduction time and reduction-degree calculation, and together with ISO 4698 (free swelling) and ISO 4700 (crushing strength) is used to evaluate the blast-furnace metallurgical performance of pellets and sinter.
3.4 BS ISO 4649 — Rubber abrasion resistance (rotating cylindrical drum)
BS ISO 4649:2010 specifies the determination of abrasion resistance of vulcanized or thermoplastic rubber (rotating cylindrical drum method), the base test for abrasion-resistant rubber products such as tyres, soles and conveyor belts. It specifies standard abrasive paper, load, abrasion travel and abrasion-volume calculation, expressed as relative volume loss or abrasion index — used to evaluate compound abrasion performance and formulation screening.
3.5 BS ISO 4730 — Oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
BS ISO 4730:2017 specifies the standard for oil of Melaleuca (tea tree), the quality benchmark for international tea-tree-oil trade. It specifies the content ranges of characteristic components (1,8-cineole, terpinen-4-ol, etc.), density, refractive index, optical rotation, solubility and other physicochemical indices plus safety requirements — used for quality control of tea tree oil as a natural antibacterial ingredient.
4. Engineering Practice and Application
This batch supports practice across many fields. Automotive safety uses 3537/3917 for safety-glazing type tests and 3929 for in-use vehicle exhaust; lifting equipment uses 4301-1/4302 for classification and wind load and 4309 for rope discard management; steelmaking uses 4695, 4698 and 4700 for iron-ore metallurgical performance; the rubber industry uses 4649/4665 for abrasion and weathering; hydraulic systems use 3723/4407 for filter elements and fluid cleanliness; aromatic materials use 4730/4731 for tea-tree and geranium oils; petroleum products use 3771/3987 for base number and sulfated ash; food testing uses 4832 for coliform enumeration. Users should follow the current official BSI edition.
Appendix — Full Standard List
The table below lists all 150 single-file BS ISO standards in this batch, in numerical order, with standard number and title.
| Standard | Title |
|---|---|
| BS ISO 03467:2016 | BS ISO 3467:2016 Machine taper pin reamers with Morse taper shanks |
| BS ISO 03468:2014 | BS ISO 3468:2014 Passenger cars — Windscreen defrosting and demisting systems — Test method |
| BS ISO 03507:1999 | BS ISO Laboratory glassware — Pyknometers |
| BS ISO 03517:2012 | BS ISO 3517:2012 Essential oil of neroli Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso) |
| BS ISO 03519:2005 | Confirmed May 2009 PRQLWRU UHODWHG LQWHUQDWLRQDO DQG (XURSHDQ GHYHORSPHQWV DQG BS ISO 3519:2005 LL BS ISO 3519:2005 LLL EODQN VSHFLILHV FHUWDLQ IROORZLQJ UHIHUHQFHG GR |
| BS ISO 03525:2008 | BS ISO 03525 |
| BS ISO 03526:2005 | BS ISO Oil of sage, Spanish Vahl) |
| BS ISO 03527:2016 | BS ISO 3527:2016 Essential oil of parsley fruits |
| BS ISO 03528:2012 | Essential oil of mandarin, Italian type (Citrus reticulata Blanco) |
| BS ISO 03529-3:2014 | BS ISO 3529-3:2014 Vacuum technology — Vocabulary Part 3: Total and partial pressure vacuum gauges |
| BS ISO 03536:2016 | BS ISO 3536:2016 Road vehicles — Safety glazing materials — Vocabulary |
| BS ISO 03537:2015 | BS ISO 3537:2015 Road vehicles — Safety glazing materials — Mechanical tests |
| BS ISO 03560:2013 | BS ISO 3560:2013 Road vehicles — Frontal fixed barrier or pole impact test procedure |
| BS ISO 03567:2011 | BS ISO 3567:2011 Vacuum gauges — Calibration by direct comparison with a reference gauge |
| BS ISO 03575:2016 | BS ISO 3575:2016 Continuous hot-dip zinc- coated and zinc-iron alloy- coated carbon steel sheet of commercial and drawing qualities |
| BS ISO 03598:2011 | BS ISO 3598:2011 Textile glass — Yarns — Basis for a specification |
| BS ISO 03600:2015 | BS ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator’s manuals — Content and format |
| BS ISO 03617:1994 | A single copy of this British Standard is licensed to Puan Ms. Norhayati This is an uncontrolled copy. Ensure use of the most current version of this document by searching British Standards Online at bsonline.techindex.co.uk |
| BS ISO 03639:1981 | BS ISO 03639 |
| BS ISO 03676:2012 | BS ISO 3676:2012 Packaging — Complete, filled transport packages and unit loads — Unit load dimensions |
| BS ISO 03720:2011 | BS ISO 3720:2011 Black tea — Definition and basic requirements |
| BS ISO 03723:2015 | BS ISO 3723:2015 Hydraulic fluid power — Filter elements — Method for end load test |
| BS ISO 03730:2012 | BS ISO 3730:2012 Shipbuilding and marine structures — Mooring winches |
| BS ISO 03761:2005 | Confirmed May 2009 LQWHUHVWV LQIRUPHG PRQLWRU UHODWHG LQWHUQDWLRQDO DQG (XURSHDQ GHYHORSPHQWV DQG BS ISO 3761:2005 BS ISO 3761:2005 EODQN |
| BS ISO 03764:2016 | BS ISO 3764:2016 Timekeeping instruments dimensions and nomenclature |
| BS ISO 03771:2011 | BS ISO 3771:2011 BS 2000-276:2011 Petroleum products — Determination of base number — Perchloric acid potentiometric titration method |
| BS ISO 03781:2011 | BS ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water |
| BS ISO 03793:1976 | BS ISO Essential Oils — Estimation of primary and secondary free alcohols content by acetylation in pyridine |
| BS ISO 03794:1976 | BS ISO Essential Oils alcohols) — Estimation of free alcohols content by determination of ester value after acetylation |
| BS ISO 03809:2004 | BS ISO Oil of lime (cold pressed), Mexican type obtained by mechanical means |
| BS ISO 03846:2008 | BS ISO Hydrometry — Open channel flow measurement using rectangular broad-crested weirs |
| BS ISO 03848:2016 | BS ISO 3848:2016 Essential oil of citronella, Java type |
| BS ISO 03849:2003 | BS ISO Oil of citronella, Sri Lanka type |
| BS ISO 03852:2007 | BS ISO Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density |
| BS ISO 03857-4:2012 | BS ISO 3857-4:2012 Compressors, pneumatic tools and machines — Vocabulary — Part 4: Air treatment |
| BS ISO 03860:2011 | BS ISO 3860:2011 Bore cutters with key drive constant profile |
| BS ISO 03862:2009 | BS ISO 03862 |
| BS ISO 03867:2001 | BS ISO Composition cork — Expansion joint fillers — Test Methods |
| BS ISO 03869:2001 | BS ISO Composition cork — Expansion joint fillers — Specifications, packaging and marking |
| BS ISO 03874:1997 | BS ISO and Amendments Nos. 1, 2 and 3 Series 1 freight containers — Handling and securing |
| BS ISO 03875:2004 | BS ISO Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy |
| BS ISO 03889:2006 | BS ISO Milk and milk products — Specification of Mojonnier-type fat extraction flasks |
| BS ISO 03894:2015 | BS ISO 3894:2015 Road vehicles — Wheels/rims for commercial vehicles — Test methods |
| BS ISO 03903:2012 | BS ISO 3903:2012 Ships and marine technology windows |
| BS ISO 03917:2016 | BS ISO 3917:2016 Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
| BS ISO 03919:2005 | BS ISO Coated abrasives — Flap wheels with shaft |
| BS ISO 03929:2003 | BS ISO Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance |
| BS ISO 03966:2008 | BS ISO 03966 |
| BS ISO 03968:2001 | BS ISO Technical Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow characteristics |
| BS ISO 03972:2011 | BS ISO 3972:2011 Sensory analysis — Methodology — Method of investigating sensitivity of taste WARNING — This document does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. |
| BS ISO 03987:2010 | BS ISO 3987:2010 BS 2000-163:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives February 2011 |
| BS ISO 03999:2004 | BS ISO 3999:2004 Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests |
| BS ISO 04040:2009 | BS ISO 04040 |
| BS ISO 04065:1996 | BS ISO Thermoplastics pipes — Universal wall thickness table |
| BS ISO 04079:2015 | BS ISO 4079:2015 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| BS ISO 04081:2016 | BS ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal- combustion engines — Specification |
| BS ISO 04096:1978 | BS ISO Essential Oils alcohols) — Evaluation of free alcohols content by determination of ester value after cold formylation |
| BS ISO 04097:2014 | BS ISO 4097:2014 Rubber, ethylene-propylene- diene (EPDM) — Evaluation procedure |
| BS ISO 04106:2012 | BS ISO 4106:2012 Motorcycles — Engine test code — Net power |
| BS ISO 04107:2010 | BS ISO 4107:2010 Commercial vehicles — Wheel- hub attachment dimensions |
| BS ISO 04113:2010 | BS ISO 4113:2010 Road vehicles — Calibration fluids for diesel injection equipment |
| BS ISO 04118:2016 | BS ISO 4118:2016 Air cargo — Non-certified lower deck containers — Design and testing |
| BS ISO 04120:2004 | BS ISO Sensory analysis — Methodology — Triangle test |
| BS ISO 04121:2003 | BS ISO Sensory analysis — Guidelines for the use of quantitative response scales |
| BS ISO 04129:2012 | BS ISO 4129:2012 Road vehicles — Mopeds indicators and tell-tales |
| BS ISO 04138:2012 | BS ISO 4138:2012 Passenger cars — Steady-state circular driving behaviour — Open-loop test methods |
| BS ISO 04150:2011 | BS ISO 4150:2011 Green coffee or raw coffee — Size analysis — Manual and machine sieving |
| BS ISO 04161:2012 | BS ISO 4161:2012 Hexagon nuts with flange, style 2 — Coarse thread |
| BS ISO 04162:2012 | Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
| BS ISO 04164:2012 | BS ISO 4164:2012 Mopeds — Engine test code |
| BS ISO 04195:2012 | BS ISO 4195:2012 Conveyor belts with heat- resistant rubber covers — Heat resistance of covers methods |
| BS ISO 04202:2016 | BS ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks |
| BS ISO 04204:2016 | BS ISO 4204:2016 taper shanks and detachable pilots |
| BS ISO 04205:2016 | BS ISO 4205:2016 shanks and solid pilots |
| BS ISO 04206:2016 | Counterbores with parallel shanks and solid pilots |
| BS ISO 04207:2016 | BS ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots |
| BS ISO 04209-2:2012 | BS ISO 4209-2:2012 Truck and bus tyres and rims (metric series) Part 2: Rims |
| BS ISO 04217:2015 | BS ISO 4217:2015 Codes for the representation of currencies |
| BS ISO 04226:2007 | BS ISO Air quality — General aspects — Units of measurement |
| BS ISO 04229:2017 | B S I S t a n d a r d s P u b l i c a t i o n A s s e m b l y t o o l s f o r s c r e w s a n d n u t s S i n gl e h e a d e n g i n e e r s wre n c h e s f o r l o w e r t o rq u e a p p l i c a t i o n s M a x i m u m o u t s i d e d i m e n s i o n s o f h e a d s a n d t e s t t o rq u e s B S I S O N a t i o n a l f o re w o rd T h i s B r i t i s h S t a n d a r d i s t h e U K i m p l e m e n t a t i o n o f I S O I t s u p e r s e d e s B S I S O w h i c h i s w i t h d r a w n T h e U K p a r t i c i p a t i o n i n i t s p r e p a r a t i o n w a s e n t r u s t e d t o T e c h n i c a l C o m m i t t e e M T E H a n d t o o l s A l i s t o f o r g a n i z a t i o n s r e p r e s e n t e d o n t h i s c o m m i t t e e c a n b e o b t a i n e d o n r e q u e s t t o i t s s e c r e t a r y T h i s p u b l i c a t i o n d o e s n o t p u r p o r t t o i n c l u d e a l l t h e n e c e s s a r y p r o v i s i o n s o f a c o n t r a c t U s e r s a r e r e s p o n s i b l e f o r i t s c o r r e c t a p p l i c a t i o n I S B N I C S C o m p l i a n c e w i t h a B r i t i s h S t a n d a r d c a n n o t c o n f e r i m m u n i t y f r o m l e g a l o b l i g a t i o n s T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h e S t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n A p r i l A m e n d m e n t s / c o r r i g e n d a i s s u e d s i n c e p u b l i c a t i o n D a t e T e x t a f f e c t e d B RI T I S H S T A N D A RD B S I S O I S O A s s e m b l y t o o l s f o r s c r e w s a n d n u t s S i n gl e h e a d e n g i n e e r s wre n c h e s f o r l o w e r t o rq u e a p p l i c a t i o n s M a x i m u m o u t s i d e d i m e n s i o n s o f h e a d s a n d t e s t t o rq u e s O u t ils de m a n o e u vr e p o u r v is e t cr o u s C l s f o u r ch e sim p le s p o u r a p p lica t io n s a u x co u p le s p l u s f a ib l e s D im e n sio n s e x t r ie u r e s m a x im a le s d e n co m b r e m e n t de s t e s e t co u p le s d e ssa i I N T E R N A T I O N A L S T A N D A R D I S O T h i r d e d i ti o n R e f e re n c e n u m b e r I S O E B S I S O I S O E i i I S O A l l r i gh ts re s e r v e d C O P YRI G H T P R O T E C T E D D O C U M E N T I S O P u b l i s h e d i n S w i t z e r l a n d A l l r i g h ts r e s e r v e d U n l e s s o th e r w i s e s p e c i f i e d n o p a r t o f th i s p u b l i c a ti o n m a y b e r e p r o d u c e d o r u ti l i z e d o th e r w i s e i n a n y f o r m o r b y a n y m e a n s e l e c tr o n i c o r m e c h a n i c a l i n c l u d i n g p h o t o c o p yi n g o r p o s t i n g o n th e i n t e r n e t o r a n i n t r a n e t , wi th o u t p r i o r wr i tt e n p e r m i s s i o n P e r m i s s i o n c a n b e re q u e s t e d f ro m e i th e r I S O a t t h e a d d r e s s b e l o w o r I S O s m e m b e r b o d y i n th e c o u n tr y o f t h e r e q u e s t e r I S O c o p yr i g h t o f f i c e C h d e B l a n d o n n e t C P C H V e r n i e r G e n e v a S wi tz e r l a n d T e l |
| BS ISO 04241:2013 | BS ISO 4241:2013 Cinematography — Projection leader (time-based), trailer and cue marks — Specifications |
| BS ISO 04246:1994 | BS ISO 04246 |
| BS ISO 04249-3:2010 | BS ISO 4249-3:2010 Motorcycle tyres and rims Part 3: Rims |
| BS ISO 04261:2013 | BS ISO 4261:2013 Petroleum products — Fuels turbine fuels for industrial and marine applications |
| BS ISO 04268:2000 | BS ISO 04268 |
| BS ISO 04269:2001 | BS ISO Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters |
| BS ISO 04301-1:2016 | BS ISO 4301-1:2016 Cranes — Classification Part 1: General |
| BS ISO 04302:2016 | BS ISO 4302:2016 Cranes — Wind load assessment |
| BS ISO 04305:2014 | Mobile cranes — Determination of stability |
| BS ISO 04309:2010 | BS ISO 4309:2010 Cranes — Wire ropes — Care and maintenance, inspection and discard |
| BS ISO 04347:2015 | BS ISO 4347:2015 Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths |
| BS ISO 04359:2013 | BS ISO 4359:2013 Flow measurement structures U-shaped flumes |
| BS ISO 04360:2008 | BS ISO Hydrometry — Open channel flow measurement using triangular profile weirs |
| BS ISO 04365:2005 | BS ISO Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density |
| BS ISO 04366:2007 | BS ISO Hydrometry — Echo sounders for water depth measurements |
| BS ISO 04377:2012 | BS ISO 4377:2012 Hydrometric determinations channels using structures — Flat-V weirs |
| BS ISO 04381:2011 | BS ISO 4381:2011 Plain bearings — Tin casting alloys for multilayer plain bearings |
| BS ISO 04383:2012 | BS ISO 4383:2012 Plain bearings — Multilayer materials for thin-walled plain bearings |
| BS ISO 04393:2015 | BS ISO 4393:2015 Fluid power systems and components — Cylinders — Basic series of piston strokes |
| BS ISO 04397:2011 | BS ISO 4397:2011 Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
| BS ISO 04401:2005 | BS ISO 04401 |
| BS ISO 04406:1999 | BS ISO 04406 |
| BS ISO 04407:2002 | BS ISO Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
| BS ISO 04409:2007 | BS ISO Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance |
| BS ISO 04411:2008 | BS ISO 04411 |
| BS ISO 04468:2009 | BS ISO 04468 |
| BS ISO 04512:2000 | BS ISO Petroleum and liquid petroleum products — Equipment for measurement of liquid levels in storage tanks — Manual methods |
| BS ISO 04568:2006 | BS ISO 4568:2006 Shipbuilding — Sea-going vessels — Windlasses and anchor capstans |
| BS ISO 04602:2010 | BS ISO 4602:2010 Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft |
| BS ISO 04604:2011 | BS ISO 4604:2011 Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle flexometer method |
| BS ISO 04647:2010 | BS ISO 4647:2010 Rubber, vulcanized — Determination of static adhesion to textile cord — H- pull test |
| BS ISO 04649:2010 | BS ISO 4649:2010 Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| BS ISO 04650:2012 | BS ISO 4650:2012 Rubber — Identification — Infrared spectrometric methods |
| BS ISO 04652:2012 | BS ISO 4652:2012 Rubber compounding ingredients — Carbon black surface area by nitrogen adsorption methods — Single- point procedures |
| BS ISO 04656:2012 | BS ISO 4656:2012 Rubber compounding ingredients — Carbon black absorption number (OAN) and oil absorption number of compressed sample (COAN) |
| BS ISO 04659:2014 | BS ISO 4659:2014 Styrene-butadiene rubber and oil masterbatches) — Evaluation procedure |
| BS ISO 04660:2011 | BS ISO 4660:2011 Rubber, raw natural — Colour index test |
| BS ISO 04664-1:2011 | BS ISO 4664-1:2011 Rubber, vulcanized or thermoplastic — Determination of dynamic properties Part 1: General guidance |
| BS ISO 04665:2016 | BS ISO 4665:2016 Rubber, vulcanized or thermoplastic — Resistance to weathering |
| BS ISO 04688-1:2006 | BS ISO Iron ores — Determination of aluminium — Part 1: Flame atomic absorption spectrometric method |
| BS ISO 04691:2009 | BS ISO 04691 |
| BS ISO 04695:2015 | BS ISO 4695:2015 Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index |
| BS ISO 04698:2007 | BS ISO Iron ore pellets for blast furnace feedstocks — Determination of the free-swelling index |
| BS ISO 04700:2015 | BS ISO 4700:2015 Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength |
| BS ISO 04701:2008 | BS ISO 04701 |
| BS ISO 04706:2008 | BS ISO 04706 |
| BS ISO 04708:2015 | BS ISO 4708:2015 Composition cork — Gasket material — Test methods |
| BS ISO 04715:1978 | BS ISO Essential oils — Quantitative evaluation of residue on evaporation |
| BS ISO 04716:2013 | BS ISO 4716:2013 Essential oil of vetiver |
| BS ISO 04718:2004 | BS ISO Oil of lemongrass |
| BS ISO 04719:2012 | BS ISO 4719:2012 Essential oil of spike lavender Spanish type |
| BS ISO 04720:2009 | BS ISO 04720 |
| BS ISO 04724:2004 | BS ISO Oil of cedarwood, Virginian type L.) |
| BS ISO 04725:2004 | BS ISO Oil of cedarwood, Texas Schiede) |
| BS ISO 04728:2003 | BS ISO Oil of Spanish wild marjoram |
| BS ISO 04730:2017 | BS ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) |
| BS ISO 04731:2012 | BS ISO 4731:2012 Essential oil of geranium |
| BS ISO 04733:2004 | BS ISO Oil of cardamom |
| BS ISO 04782:1987 | BS ISO Specification for metal wire for industrial wire screens and woven wire cloth |
| BS ISO 04795:1996 | BS ISO 04795 |
| BS ISO 04798:1997 | BS ISO Laboratory glassware — Filter funnels |
| BS ISO 04800:1998 | BS ISO Laboratory glassware — Separating funnels and dropping funnels |
| BS ISO 04832:2006 | BS ISO Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of coliforms — Colony-count technique |
| BS ISO 04866:2010 | BS ISO 4866:2010 Reference number ISO 4866:2010(E) INTERNATIONAL STANDARD ISO Second edition Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures Vibrations et chocs mécaniques — Vibrations des structures fixes — Lignes directrices pour le mesurage des vibrations et l’évaluation de leurs effets sur les structures BS ISO 4866:2010 ISO 4866:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe’s licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s member body in the country of the requester. ISO copyright office Web Published in Switzerland ii BS ISO 4866:2010 ISO 4866:2010(E) iii Contents Page Foreword …………………………………………………………………………………………………………………………………………iv Introduction………………………………………………………………………………………………………………………………………v Scope……………………………………………………………………………………………………………………………………1 Normative references…………………………………………………… |
| BS ISO 04900:2011 | BS ISO 4900:2011 Textile glass — Mats and fabrics — Determination of contact mouldability |
| BS ISO 04901:2011 | BS ISO 4901:2011 Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography |
| BS ISO 04919:2012 | BS ISO 4919:2012 Carpets — Determination of tuft withdrawal force |
| BS ISO 04925:2005 | BS ISO Road vehicles — Specification of non-petroleum-base brake fluids for hydraulic systems |
| BS ISO 04926:2006 | BS ISO Road vehicles — Hydraulic braking systems — Non-petroleum-base reference fluids |
| BS ISO 04939:2016 | BS ISO 4939:2016 Steel — Determination of nickel — Dimethylglyoxime spectrophotometric method |
Frequently Asked Questions
What main fields does this batch cover?
This batch is the 150 independent standards from BS ISO 3467 to BS ISO 4939, spanning road-vehicle safety glazing, cranes, essential oils, rubber evaluation, iron ore/steel, hydraulic fluid power, hydrometry and shipping.
This batch is the 150 independent standards from BS ISO 3467 to BS ISO 4939, spanning road-vehicle safety glazing, cranes, essential oils, rubber evaluation, iron ore/steel, hydraulic fluid power, hydrometry and shipping.
What does the safety glazing mechanical test standard (3537) cover?
BS ISO 3537:2015 specifies drop-ball impact, penetration resistance and fragmentation tests, paired with 3917 for radiation/high-temperature/humidity tests, used for automotive glazing type tests.
BS ISO 3537:2015 specifies drop-ball impact, penetration resistance and fragmentation tests, paired with 3917 for radiation/high-temperature/humidity tests, used for automotive glazing type tests.
What is the role of the crane wire-rope discard standard (4309)?
BS ISO 4309:2010 specifies inspection periods, broken-wire counts and wear/corrosion discard criteria for crane ropes to ensure safe hoisting.
BS ISO 4309:2010 specifies inspection periods, broken-wire counts and wear/corrosion discard criteria for crane ropes to ensure safe hoisting.
What is the scope of the iron-ore reducibility standard (4695)?
BS ISO 4695:2015 specifies reducibility determination (rate-of-reduction index) for blast-furnace feedstocks to evaluate pellet and sinter performance.
BS ISO 4695:2015 specifies reducibility determination (rate-of-reduction index) for blast-furnace feedstocks to evaluate pellet and sinter performance.
Why is the tea tree oil standard (4730) important?
BS ISO 4730:2017 specifies the physicochemical indices and safety requirements of Melaleuca tea tree oil, the quality benchmark for international trade.
BS ISO 4730:2017 specifies the physicochemical indices and safety requirements of Melaleuca tea tree oil, the quality benchmark for international trade.
⚠️ BS ISO 3793, 4096, 4795 and 4952 in this batch are scan editions; their content is written from public-domain knowledge in the field, and the authoritative text is the official BSI edition.