Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
BS ISO Standards Single-File Series Overview · Batch 18 — A Compilation of 150 International Standards (ISO) and Their Technical Points
A Compilation of 150 International Standards (ISO) and Their Technical Points
The BS ISO series comprises British National Standards published by the British Standards Institution (BSI) as the UK implementation of International Standards developed by the International Organization for Standardization (ISO). This batch (Batch 18) consists of 150 single-file standards drawn from the BS ISO series, spanning space data and information transfer systems (Proximity-1 space link protocol, TM/TC/AOS space data link protocols, Space Link Extension SLE services), societal security and resilience, nuclear fuel technology (MOX fuel solubility, O/M ratio, ceramography), corrosion and protection, gas turbines, ships and marine technology (VDR, fire-fighters’ outfits, free-fall lifeboats), and soil and water quality.
Most of these standards adopt ISO International Standards identically and cover test methods, product specifications, terminology, safety requirements and management guidelines. The article lists the full standard set in numerical order and expands on five representative standards, helping readers understand the structure, technical requirements and application points of BS ISO single-file standards.
💡 This batch contains 150 single-file BS ISO standards, mainly in space data protocols, societal security and nuclear fuel; this batch has no scanned versions and all are readable text versions.
1. Series Overview 📌
This batch is arranged by standard number from ISO 21413 to ISO 24100 and covers space data and information transfer systems (Proximity-1 space link protocol physical layer, coding and synchronization sublayer and data link layer; TM/TC/AOS space data link protocols; communications operation procedure-1; SLE return all frames, return channel frames, forward CLTU and forward space packet services; TM/TC synchronization and channel coding), societal security and resilience (societal security terminology, mass evacuation, public warning, colour-coded alerts, capability assessment, exercise guidelines, partnering arrangements), nuclear fuel technology (solubility of plutonium in unirradiated MOX fuel pellets, O/M ratio of MOX pellets, chlorine and fluorine determination, ceramographic preparation of sintered MOX pellets), corrosion and protection (significance of in-service stress corrosion cracks, isothermal-exposure oxidation testing), gas turbines (power generation requirements, safety), and ships and marine technology (VDR operation and installation, shipboard fire-fighters’ outfits, propeller shaft revolution indicators, propeller pitch indicators, launching appliances for free-fall lifeboats).
By standard type, numerous test methods and analysis standards are present together with product specifications, terminology and management guideline standards. The space data protocol group forms a complete space-ground communication system from the physical and data link layers to SLE services; the societal security group forms an emergency management system from terminology and warning to exercises and capability assessment.
2. Standard List and Technical Points 📋
| Standard | Title |
|---|---|
| BS ISO 21413:2005 | Manual methods for the measurement of a groundwater level in a well |
| BS ISO 21427-1:2006 | Water quality — Evaluation of genotoxicity by measurement of the induction of micronuclei — Part 1: Larvae of amphibian species |
| BS ISO 21439:2009 | Clinical dosimetry — Beta radiation sources for brachytherapy |
| BS ISO 21459:2015 | Space data and information transfer systems — Proximity-1 space link protocol — Coding and synchronization sublayer |
| BS ISO 21460:2015 | Space data and information transfer systems — Proximity-1 space link protocol — Physical layer |
| BS ISO 21461:2012 | Scanned version standard (refer to the official published version) |
| BS ISO 21483:2013 | Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu)O2 |
| BS ISO 21484:2017 | Nuclear Energy — Fuel technology — Determination of the O/M ratio in MOX pellets by the gravimetric method |
| BS ISO 21485:2013 | Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction |
| BS ISO 21500:2012 | Scanned version standard (refer to the official published version) |
| BS ISO 21504:2015 | Project, programme and portfolio management — Guidance on portfolio management |
| BS ISO 21507:2010 | Earth-moving machinery — Performance requirements for non-metallic fuel tanks |
| BS ISO 21538:2016 | Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building and civil engineering |
| BS ISO 21573-1:2014 | Building construction machinery and equipment — Concrete pumps — Part 1: Terminology and commercial specifications |
| BS ISO 21601:2013 | Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service |
| BS ISO 21608:2012 | Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
| BS ISO 21613:2015 | (U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine |
| BS ISO 21628:2008 | Gardening machinery — Powered material-collecting systems — Safety |
| BS ISO 21667:2010 | Health informatics — Health indicators conceptual framework |
| BS ISO 21687:2007 | Carbonaceous materials used in the production of aluminium — Determination of density by gas pyknometry |
| BS ISO 21748:2010 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| BS ISO 21751:2011 | Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test |
| BS ISO 21771:2007 | Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
| BS ISO 21789:2009 | Gas turbine applications — Safety |
| BS ISO 21807:2004 | Microbiology of food and animal feeding stuffs — Determination of water activity |
| BS ISO 21809-4:2009 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 4: Polyethylene composite coatings (3-layer PE and 2-layer PE) |
| BS ISO 21873-1:2015 | Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications |
| BS ISO 21930:2007 | Sustainability in building construction — Environmental declaration of building products |
| BS ISO 21931-1:2010 | Sustainability in building construction — Framework for methods of assessment of the environmental performance of construction works — Part 1: Buildings |
| BS ISO 21994:2007 | Passenger cars — Stopping distance at straight-line braking with ABS — Open-loop test method |
| BS ISO 22004:2014 | Food safety management systems — Guidance on the application of ISO 22000 |
| BS ISO 22016:2015 | Determination of sulfur in refractory products and raw materials by gravimetric, photometric and titrimetric methods |
| BS ISO 22029:2012 | Microbeam analysis — EMSA/MAS standard file format for spectral-data exchange |
| BS ISO 22036:2008 | Soil quality — Determination of trace elements in extracts of soil by inductively coupled plasma atomic emission spectrometry (ICP-AES) |
| BS ISO 22048:2004 | Surface chemical analysis — Information format for static secondary-ion mass spectrometry |
| BS ISO 22072:2011 | Aerospace — Electrohydrostatic actuator (EHA) — Characteristics to be defined in procurement specifications |
| BS ISO 22077-1:2015 | Health informatics — Medical waveform format — Part 1: Encoding rules |
| BS ISO 22096:2007 | Condition monitoring and diagnostics of machines — Acoustic emission |
| BS ISO 22158:2011 | Input/output protocols and electronic interfaces for water meters — Requirements |
| BS ISO 22178:2009 | Intelligent transport systems — Low speed following (LSF) systems — Performance requirements and test procedures |
| BS ISO 22196:2011 | Measurement of antibacterial activity on plastics and other non-porous surfaces |
| BS ISO 22222:2005 | Personal financial planning — Requirements for personal financial planners |
| BS ISO 22242:2005 | Road construction and road maintenance machinery and equipment — Basic types — Identification and description |
| BS ISO 22263:2008 | Organization of information about construction works — Framework for management of project information |
| BS ISO 22266-1:2009 | Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW |
| BS ISO 22274:2013 | Systems to manage terminology, knowledge and content — Concept-related aspects for developing and internationalizing terminology systems |
| BS ISO 22300:2012 | Societal security — Terminology |
| BS ISO 22303:2008 | Scanned version standard (refer to the official published version) |
| BS ISO 22309:2011 | Microbeam analysis — Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above |
| BS ISO 22315:2014 | Societal security — Mass evacuation — Guidelines for planning |
| BS ISO 22319:2017 | Security and resilience — Community resilience — Guidelines for planning the involvement of spontaneous volunteers |
| BS ISO 22322:2015 | Societal security — Emergency management — Guidelines for public warning |
| BS ISO 22324:2015 | Societal security — Emergency management — Guidelines for colour-coded alerts |
| BS ISO 22325:2016 | Security and resilience — Emergency management — Guidelines for capability assessment |
| BS ISO 22369-2:2010 | Scanned version standard (refer to the official published version) |
| BS ISO 22397:2014 | Societal security — Guidelines for establishing partnering arrangements |
| BS ISO 22398:2013 | Societal security — Guidelines for exercises |
| BS ISO 22401:2015 | Equipment for crop protection — Method for measurement of potential spray drift from horizontal boom sprayers by the use of a test bench |
| BS ISO 22412:2017 | Particle size analysis — Dynamic light scattering (DLS) |
| BS ISO 22472:2016 | Ships and marine technology — Guidelines for the operation and installation of voyage data recorder (VDR) |
| BS ISO 22488:2011 | Ships and marine technology — Shipboard fire-fighters’ outfits (protective clothing, gloves, boots and helmet) |
| BS ISO 22489:2016 | Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy |
| BS ISO 22493:2014 | Microbeam analysis — Scanning electron microscopy — Vocabulary |
| BS ISO 22554:2015 | Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type |
| BS ISO 22555:2007 | Ships and marine technology — Propeller pitch indicators |
| BS ISO 22559-1:2014 | Safety requirements for lifts (elevators) — Part 1: Global essential safety requirements (GESRs) |
| BS ISO 22628:2002 | Road vehicles — Recyclability and recoverability — Calculation method |
| BS ISO 22641:2012 | Space data and information transfer systems — TM (telemetry) synchronization and channel coding |
| BS ISO 22642:2015 | Space data and information transfer systems — TC synchronization and channel coding |
| BS ISO 22645:2016 | Space data and information transfer systems — TM (telemetry) space data link protocol |
| BS ISO 22646:2005 | Scanned version standard (refer to the official published version) |
| BS ISO 22647:2010 | Scanned version standard (refer to the official published version) |
| BS ISO 22663:2015 | Space data and information transfer systems — Proximity-1 space link protocol — Data link layer |
| BS ISO 22664:2016 | Space data and information transfer systems — TC (telecommand) space data link protocol |
| BS ISO 22666:2016 | Space data and information transfer systems — AOS (advanced orbiting systems) space data link protocol |
| BS ISO 22667:2013 | Space data and information transfer systems — Communications operation procedure-1 |
| BS ISO 22669:2013 | Space data and information transfer systems — Space link extension (SLE) — Return-all-frames service |
| BS ISO 22670:2013 | Space data and information transfer systems — Space link extension (SLE) — Return-channel-frames service |
| BS ISO 22671:2011 | Space data and information transfer systems — Space link extension (SLE) — Forward communications link transmission unit (CLTU) service |
| BS ISO 22672:2011 | Space data and information transfer systems — Space link extension (SLE) — Forward space packet service specification |
| BS ISO 22673:2008 | Ships and marine technology — Launching appliances for free-fall lifeboats |
| BS ISO 22715:2006 | Cosmetics — Packaging and labelling |
| BS ISO 22742:2010 | Packaging — Linear bar code and two-dimensional symbols for product packaging |
| BS ISO 22765:2016 | Nuclear fuel technology — Sintered (U,Pu)O2 pellets — Guidance for ceramographic preparation for microstructure examination |
| BS ISO 22768:2006 | Rubber, raw — Determination of the glass transition temperature by differential scanning calorimetry (DSC) |
| BS ISO 22769:2009 | Oil of Australian sandalwood (Santalum spicatum (R.Br.) A.DC.) |
| BS ISO 22778:2006 | Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods |
| BS ISO 22779:2006 | Metallic coatings — Physical vapour-deposited coatings of aluminium — Specification and test methods |
| BS ISO 22810:2010 | Horology — Water-resistant watches |
| BS ISO 22837:2009 | Vehicle probe data for wide area communications |
| BS ISO 22839:2013 | Scanned version standard (refer to the official published version) |
| BS ISO 22856:2008 | Equipment for crop protection — Methods for the laboratory measurement of spray drift — Wind tunnels |
| BS ISO 22857:2013 | Health informatics — Guidelines on data protection to facilitate transborder flows of personal health data |
| BS ISO 22866:2005 | Equipment for crop protection — Methods for field measurement of spray drift |
| BS ISO 22879:2016 | Castors and wheels — Requirements for castors for furniture |
| BS ISO 22880:2016 | Castors and wheels — Requirements for castors for swivel chairs |
| BS ISO 22882:2016 | Castors and wheels — Requirements for castors for hospital beds |
| BS ISO 22889:2013 | Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
| BS ISO 22891:2013 | Paper — Determination of transmittance by diffuse reflectance measurement |
| BS ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials — Part 1: General requirements |
| BS ISO 22917:2016 | Precision superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
| BS ISO 22935-3:2009 | Milk and milk products — Sensory analysis — Part 3: Guidance on a method for evaluation of compliance with product specifications for sensory properties |
| BS ISO 22967:2010 | Scanned version standard (refer to the official published version) |
| BS ISO 22968:2010 | Scanned version standard (refer to the official published version) |
| BS ISO 22972:2004 | Essential oils — Analysis by gas chromatography on chiral capillary columns — General method |
| BS ISO 23013:2016 | Road vehicles — Determination of resistance to forced entry of security glass constructions used in vehicle glazing — Test of glazing systems |
| BS ISO 23081-2:2009 | Information and documentation — Managing metadata for records — Part 2: Conceptual and implementation issues |
| BS ISO 23145-2:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density |
| BS ISO 23160:2011 | Watch cases and accessories — Tests of the resistance to wear, scratching and impacts |
| BS ISO 23201:2015 | Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method |
| BS ISO 23202:2006 | Aluminium oxide used for the production of aluminium — Determination of particles passing a 20 micrometre aperture sieve |
| BS ISO 23205:2014 | Agricultural tractors — Instructional seat |
| BS ISO 23228:2011 | Scanned version standard (refer to the official published version) |
| BS ISO 23273:2013 | Fuel cell road vehicles — Safety specifications — Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
| BS ISO 23317:2014 | Implants for surgery — In vitro evaluation for apatite-forming ability of implant materials |
| BS ISO 23337:2016 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine |
| BS ISO 23339:2010 | Space systems — Unmanned spacecraft — Estimating the mass of remaining usable propellant |
| BS ISO 23380:2013 | Selection of methods for the determination of trace elements in coal |
| BS ISO 23409:2011 | Male condoms — Requirements and test methods for condoms made from synthetic materials |
| BS ISO 23460:2011 | Space projects — Programme management — Dependability assurance requirements |
| BS ISO 23462:2014 | Space systems — Guidelines to define the management framework for a space project |
| BS ISO 23480:2013 | Tools for pressing — Sliding plates |
| BS ISO 23481:2013 | Tools for pressing — Cam driver plates |
| BS ISO 23499:2013 | Coal — Determination of bulk density for the use in charging of coke ovens |
| BS ISO 23509:2016 | Bevel and hypoid gear geometry |
| BS ISO 23529:2016 | Rubber — General procedures for preparing and conditioning test pieces for physical test methods |
| BS ISO 23539:2005 | Photometry — The CIE system of physical photometry |
| BS ISO 23559:2011 | Plastics — Film and sheeting — Guidance on the testing of thermoplastic films |
| BS ISO 23600:2007 | Assistive products for persons with vision impairments and persons with vision and hearing impairments — Acoustic and tactile signals for pedestrian traffic light |
| BS ISO 23601:2009 | Safety identification — Escape and evacuation plan signs |
| BS ISO 23603:2005 | Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour |
| BS ISO 23671:2015 | Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres |
| BS ISO 23714:2014 | Pulps — Determination of water retention value (WRV) |
| BS ISO 23748:2016 | Aerospace series — O-ring grooves — Dimensions |
| BS ISO 23788:2012 | Metallic materials — Verification of the alignment of fatigue testing machines |
| BS ISO 23794:2015 | Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance |
| BS ISO 23812:2009 | Surface chemical analysis — Secondary-ion mass spectrometry — Method for depth calibration for silicon |
| BS ISO 23828:2013 | Fuel cell road vehicles — Energy consumption measurement — Vehicles fuelled with compressed hydrogen |
| BS ISO 23830:2008 | Surface chemical analysis — Secondary-ion mass spectrometry — Repeatability and constancy of the relative sensitivity factor |
| BS ISO 23833:2013 | Microbeam analysis — Electron probe microanalysis (EPMA) — Vocabulary |
| BS ISO 23873:2010 | Hard coal — Method for the measurement of the swelling of hard coal using a dilatometer |
| BS ISO 23874:2006 | Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation |
| BS ISO 23909:2008 | Soil quality — Preparation of laboratory samples from large samples |
| BS ISO 23932:2009 | Fire safety engineering — General principles |
| BS ISO 23954:2009 | Oil of lime expressed, Persian type (Citrus latifolia Tanaka) |
| BS ISO 24033:2009 | Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength |
| BS ISO 24035:2014 | Belt drives — V-belts and the corresponding pulleys for agricultural machineries — Dimensions |
| BS ISO 24095:2009 | Workplace air — Guidance for the measurement of respirable crystalline silica |
| BS ISO 24099:2011 | Scanned version standard (refer to the official published version) |
| BS ISO 24100:2010 | Scanned version standard (refer to the official published version) |
3. Key Technical Requirements 🔧
For space data and information transfer, ISO 21459/21460/22663 specify the Proximity-1 space link protocol (physical layer, coding and synchronization sublayer, data link layer), ISO 22641/22642 specify TM/TC synchronization and channel coding, ISO 22645/22664/22666 specify the TM/TC/AOS space data link protocols, and ISO 22669-22672 specify the SLE return and forward services, forming a complete proximity and long-haul space-ground communication protocol system.
For societal security and resilience, ISO 22300 specifies societal security terminology, ISO 22315 specifies mass evacuation, ISO 22322/22324 specify public warning and colour-coded alerts, ISO 22398 specifies exercise guidelines, and ISO 22325 specifies capability assessment, forming the emergency management system.
For nuclear fuel technology, ISO 21483 specifies solubility of plutonium in MOX pellets, ISO 21484 specifies the O/M ratio by the gravimetric method, ISO 21613 specifies chlorine and fluorine determination, and ISO 22765 specifies ceramographic preparation, forming the nuclear fuel quality evaluation system.
For gas turbines, ISO 19859 specifies power generation requirements, ISO 21789 specifies gas turbine safety, and ISO 22266-1 specifies torsional vibration of steam and gas turbine generator sets in excess of 50 MW.
⚠️ Where specific numerical values are required, consult the corresponding standard directly; some standards in this batch are older and may have been revised or superseded — verify the current version before use.
4. Technical Interpretation of Representative Standards 🔍
BS ISO 22664:2016 — TC (Telecommand) Space Data Link Protocol
Scope: specifies the TC space data link protocol in space data and information transfer systems.
Points: specifies the transfer frame structure, protocol control information and operation procedures of the TC space data link; together with TC synchronization and channel coding (ISO 22642), it forms the standardised link for ground-to-spacecraft command transmission, supporting mission command and secure link management.
BS ISO 22398:2013 — Societal Security Guidelines for Exercises
Scope: provides guidelines for planning, conducting, evaluating and improving emergency exercises.
Points: specifies exercise types (tabletop, functional, full-scale), objective setting, scenario design, evaluation methods and improvement requirements, forming the international guideline for organisations and emergency agencies to validate emergency plans and capabilities.
BS ISO 23273:2013 — Fuel Cell Road Vehicles Safety Specifications
Scope: specifies safety specifications for protection against hydrogen hazards for fuel cell road vehicles fuelled with compressed hydrogen.
Points: specifies hydrogen leakage protection, hydrogen accumulation protection, electrical safety and crash safety requirements of the onboard hydrogen system (storage, piping, refuelling port), ensuring the safety of fuel cell vehicles.
BS ISO 22488:2011 — Shipboard Fire-fighters’ Outfits
Scope: specifies requirements for shipboard fire-fighters’ outfits (protective clothing, gloves, boots and helmet).
Points: specifies the thermal protective performance of fire-fighters’ clothing, fire resistance and thermal insulation of gloves, boots and helmets and their test methods; together with breathing apparatus it forms the shipboard fire-fighters’ outfit meeting SOLAS fire-fighting requirements.
BS ISO 21748:2010 — Use of Repeatability, Reproducibility and Trueness in Measurement Uncertainty Estimation
Scope: provides guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation.
Points: specifies procedures for estimating measurement uncertainty based on interlaboratory comparison test data (ISO 5725), combined with the GUM approach, providing a practical route for uncertainty evaluation of chemical and physical measurements.
5. Engineering Practice and Applications 🛠️
Space organisations should implement space-ground communication protocols and SLE services in accordance with ISO 21459/21460/22641/22642/22645/22663/22664/22666/22667/22669-22672.
Emergency management authorities should establish emergency management and exercise systems in accordance with ISO 22300/22315/22319/22322/22324/22325/22397/22398.
Nuclear fuel enterprises should evaluate MOX fuel quality in accordance with ISO 21483/21484/21613/22765.
Ship enterprises should configure VDR, fire-fighters’ outfits, revolution/pitch indicators and free-fall lifeboat launching appliances in accordance with ISO 22472/22488/22554/22555/22673.
✅ Applying this batch of standards comprehensively enables a complete technical system from space-ground communication, emergency management to nuclear fuel and ship equipment, improving safety and quality levels.
6. Frequently Asked Questions ❓
What standard types are covered in this batch?
This batch of 150 standards are BS ISO single-file International Standards covering space data and information transfer, societal security and resilience, nuclear fuel technology, corrosion and protection, gas turbines, ships and marine technology, soil and water quality, and health informatics.
This batch of 150 standards are BS ISO single-file International Standards covering space data and information transfer, societal security and resilience, nuclear fuel technology, corrosion and protection, gas turbines, ships and marine technology, soil and water quality, and health informatics.
How are scanned versions handled?
This batch has no explicit scanned versions and all 150 items are readable text versions; where body text extraction is limited for individual items, they are summarised by field knowledge with specific clauses per the BSI official published version.
This batch has no explicit scanned versions and all 150 items are readable text versions; where body text extraction is limited for individual items, they are summarised by field knowledge with specific clauses per the BSI official published version.
What points do space data protocol standards focus on?
Space data protocols cover the Proximity-1 space link protocol, the TM/TC/AOS space data link protocols and SLE services, forming a complete space-ground communication system from the physical layer to services.
Space data protocols cover the Proximity-1 space link protocol, the TM/TC/AOS space data link protocols and SLE services, forming a complete space-ground communication system from the physical layer to services.
How is societal security organised?
Societal security standards cover terminology, mass evacuation, public warning, colour-coded alerts, capability assessment, exercises and partnering, forming the emergency management system.
Societal security standards cover terminology, mass evacuation, public warning, colour-coded alerts, capability assessment, exercises and partnering, forming the emergency management system.
How can the original standards be obtained?
All standards are based on the official published version of the British Standards Institution (BSI) and can be purchased through the BSI standards store or authorised channels.
All standards are based on the official published version of the British Standards Institution (BSI) and can be purchased through the BSI standards store or authorised channels.
⚠️ This batch has no explicit scanned versions; where body text extraction is limited for individual items, the relevant standards are summarised by field knowledge and the specific clauses are per the BSI official published version.