🧪 BS EN ISO 18218 is the British Standard series implementing European Standard EN ISO 18218, providing chemical test methods for determining ethoxylated alkylphenols (Alkylphenol Ethoxylates, APEO) in leather. APEO are a class of non-ionic surfactants widely used in the tanning industry as degreasing agents, emulsifiers, and wetting agents, but their degradation products exhibit endocrine-disrupting activity and are strictly regulated in the EU and international markets. The series consists of two parts — Part 1: Direct method and Part 2: Indirect method — which apply to different sample states and target ranges, providing a unified, comparable basis for the ecological safety assessment of leather and leather products.
💡 Determination of APEO in leather is a key element of ecological standards for leather and textiles. BS EN ISO 18218 uses modern analytical techniques such as liquid chromatography-mass spectrometry (LC-MS) and gas chromatography-mass spectrometry (GC-MS) for quantitative and confirmatory analysis of APEO in leather.
1. Scope and General Framework 📌
The series falls under ICS 59.140.30 (Leather technology), was developed with UK participation through Technical Committee TCI/69 (Footwear, leather and coated fabrics), and is published as the UK implementation of EN ISO 18218. It specifies the complete procedure for determining ethoxylated alkylphenols in leather, including sample preparation, extraction, clean-up, and instrumental analysis, and applies to leather, leather products, and related coated materials.
The core of the standard is the distinction between two measurement strategies: the direct method measures the ethoxylated alkylphenols themselves, while the indirect method measures their degradation products (such as alkylphenols) to infer the total pollutant load. Together they give a complete picture of non-ionic surfactant residues in leather.
| Standard Part | Year | Measurement Strategy | Primary Analytes | Typical Use |
| BS EN ISO 18218-1 | 2015 | Direct method | Ethoxylated alkylphenols (APEO) | Direct quantification of APEO in leather |
| BS EN ISO 18218-2 | 2015 | Indirect method | Alkylphenols and their ethoxylates | Comprehensive assessment of related pollutants |
⚠️ APEO results are strongly influenced by leather matrix colour, fat content, and tanning process. Extraction efficiency differs between chrome-tanned, vegetable-tanned, and combination-tanned leathers; matrix-spike recovery tests should be performed to verify method applicability.
2. Series Structure and Technical Points 🔬
2.1 Part 1 Direct Method (BS EN ISO 18218-1:2015)
The direct method measures intact ethoxylated alkylphenol molecules that have not degraded. It typically involves grinding or pulverising the leather sample, extraction with an appropriate organic solvent (such as methanol or a methanol-water mixture) using ultrasonic or Soxhlet extraction, clean-up on a solid-phase extraction (SPE) column (silica or C18) to remove interfering matrix components, followed by separation and detection using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Quantification using characteristic ion transitions (precursor-product ion pairs) greatly improves selectivity and sensitivity, reducing background interference from natural leather extracts.
The direct method is advantageous because it is targeted and unambiguous, reflecting the original APEO residue level in leather; its limitation is that it cannot cover material already degraded to short-chain or free alkylphenols, hence the need to combine it with the indirect method.
2.2 Part 2 Indirect Method (BS EN ISO 18218-2:2015)
The indirect method measures degradation products (chiefly alkylphenols such as nonylphenol and octylphenol and their short-chain ethoxylates) that may form during tanning or storage, to infer the overall APEO residue. It typically uses gas chromatography-mass spectrometry (GC-MS), with the sample extracted, cleaned up, and, where necessary, derivatised before injection. The indirect method better reflects the total amount of degradation products of environmental and health concern, providing more complete chemical information for risk assessment.
💡 Direct and indirect methods are complementary: the direct method reveals “original contaminants”, while the indirect method reveals “degradation products”. Combining both gives a full picture of APEO-type substances in leather.
3. Key Technical Requirements 🔧
Whether the direct or indirect method is used, the BS EN ISO 18218 series sets systematic quality control requirements across the analytical process:
- Sample preparation: leather must be cut or ground to a uniform state to avoid local enrichment; sample mass, solvent volume, and extraction time must follow the standard to ensure complete extraction.
- Extraction and clean-up: after solvent extraction, the extract must be cleaned to remove oils, dyes, and other matrix interferences; activation, washing, and elution conditions of the clean-up column must be validated.
- Instrument conditions: LC mobile phase composition, gradient programme, column temperature, and MS ion source parameters and collision energies must be optimised to achieve effective separation of analytes from interferences.
- Quantification and calibration: external or internal standard calibration; internal standards (e.g., isotope-labelled analogues) compensate for sample preparation losses and matrix effects, improving accuracy.
- Method validation: linear range, limit of detection, limit of quantification, recovery, and precision should be established to confirm suitability in the leather matrix.
🚨 Ethoxylated alkylphenols and their degradation products are environmental contaminants of concern. Laboratories must take appropriate protective measures and dispose of organic waste properly to avoid environmental pollution and operator exposure.
4. Engineering Practice and Application Guidance 🛠️
- 🔍 Product compliance assessment: for limits set by the EU REACH Regulation and OEKO-TEX® standards, leather and leather products should be tested for residues before export.
- 🔬 Method selection: the direct method is suitable for rapid screening; combining direct and indirect methods is preferable for comprehensive assessment of pollutant forms.
- 📊 Data handling: results are usually expressed in mg/kg; note the treatment of values below the detection limit and whether moisture-content correction is applied.
- 📋 Laboratory quality management: laboratories are advised to participate in proficiency testing (PT) schemes and maintain quality control charts to monitor long-term analytical stability.
5. Frequently Asked Questions ❓
❓ Q: What is the relationship between BS EN ISO 18218 and OEKO-TEX® standards?
A: BS EN ISO 18218 provides the concrete method for determining APEO in leather, while ecological standards such as OEKO-TEX® set the limit values. They work together: the method standard defines “how to measure”, and the product standard defines “how much is allowed”.
❓ Q: Can the direct and indirect methods substitute for each other?
A: No. They target different analytes: the direct method measures ethoxylated alkylphenols themselves, while the indirect method measures their degradation products. Both should generally be used together for complete information.
❓ Q: Why does the leather matrix interfere with APEO determination?
A: Leather contains oils, dyes, tanning agents, and natural extracts that compete for ionisation or cause matrix suppression. Clean-up steps and internal-standard correction effectively mitigate these effects.
❓ Q: How should results be reported?
A: The report should state the method used (Part 1 or Part 2), sample preparation, limit of detection and quantification, and whether moisture correction was applied, to allow comparison with results from other laboratories.