BS EN ISO 13982 — Protective Clothing for Use Against Solid Particulates (Type 5 Clothing)

Protective Clothing for Use Against Solid Particulates: Performance Requirements for Type 5 Clothing and Test Method of Determination of Inward Leakage of Aerosols

🧤 BS EN ISO 13982 is the British Standard (BSI) series that adopts the European Standard, itself identical to an International Standard, for chemical protective clothing against solid particulates. The series mainly addresses “Type 5” clothing — full-body chemical protective suits for airborne solid particulates (dust, aerosols). It has two parts: Part 1 specifies the performance requirements for Type 5 clothing, and Part 2 specifies the aerosol inward-leakage test method. The technical content was prepared by relevant subcommittees of ISO/TC 94 “Protective clothing and equipment” and introduced into the British Standards system by BSI, widely used to evaluate protective suits in asbestos, dust, radioactive-aerosol, and biological-contamination environments.

💡 Type 5 clothing is a full-body protective suit against airborne solid particulates (dust, aerosols). Its protective performance depends not only on the fabric but also on the sealing of seams, closures, and openings, so the inward-leakage test is key to evaluating overall protection.

1. Series Overview 📌

The series covers ICS 13.340.10 (Protective clothing) and has two parts:

StandardTitleMain Content
BS EN ISO 13982-1:2004 + A1:2010Protective clothing for use against solid particulates — Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing)Specifies material, seam, and overall protection requirements for Type 5 clothing
BS EN ISO 13982-2:2004Protective clothing for use against solid particulates — Part 2: Test method of determination of inward leakage of aerosolsSpecifies the aerosol test method for determining inward leakage

Part 1 was published in 2005 and amended by A1:2010 (adopting ISO Amendment 1:2010); Part 2 was published in 2004. In the UK, technical responsibility is vested in subcommittee PH/3/3, Clothing for protection against chemicals and radioactive contamination, under PH/3 (Protective clothing).

⚠️ Type 5 clothing protects against airborne solid particulates but not liquid chemicals (e.g., splashes, vapours) or gases; for those, use Type 6 or other types. Select according to the hazard type.

2. Performance Requirements for Type 5 Clothing (Part 1) 🧪

Part 1 specifies that Type 5 clothing should provide full-body protection against airborne solid particulates. Performance requirements cover material strength, seam strength, and overall protective performance:

  • Material performance: the fabric should have adequate strength, tear and abrasion resistance, and barrier to solid particulate penetration.
  • Seam performance: seams should be strong and sealed to prevent particulate ingress through seams.
  • Overall protection: closures, zips, cuffs, and ankles should be well sealed to prevent aerosol inward leakage.
  • Marking and instructions: mark type, class, and use limits, and provide application instructions.
💡 The protective focus of Type 5 clothing is “full-body coverage + sealing”. Even with excellent fabric barrier, particulates can enter through openings if closures and seams are not tight, so overall sealing and inward leakage are core indicators.

3. Aerosol Inward-Leakage Test (Part 2) 📊

Part 2 specifies the test method for determining the inward leakage of protective clothing using aerosols. In the test, a wearer puts on the suit inside a test chamber filled with aerosol (e.g., sodium chloride or oil mist), performs specified movements (walking, raising arms, bending), and the ratio of aerosol concentration inside to outside the clothing is measured as the (total) inward leakage.

Inward leakage reflects the overall particulate-protection effect and is a key indicator for Type 5 clothing. The test should use specified aerosol particle-size distribution and concentration, follow the specified movement sequence, and sample at multiple measurement points.

ItemDescriptionSignificance
Test chamberEnclosed chamber filled with specified aerosolSimulates contaminated environment
Wearer movementsSpecified walking, arm-raise, bendingSimulates actual working postures
SamplingCollect aerosol at multiple positions inside clothingAssesses ingress at different locations
Inward leakageInside/outside concentration ratioOverall protective performance
⚠️ Inward leakage is closely related to the wearer’s physique, movements, and clothing fit. The test must follow specified movements and sampling; otherwise results are not comparable. Poor fit significantly increases inward leakage.

4. Engineering Practice and Application 🛠️

Protective suits against solid particulates are widely used in occupational health and emergency protection:

  • 🔍 Dust and asbestos work: prevent particulate inhalation in asbestos removal, dust sweeping, and grinding.
  • ☢️ Radioactive-aerosol protection: prevent radioactive aerosol inhalation in nuclear and radiation facilities.
  • 🦠 Biological-contamination protection: prevent biological-aerosol exposure in laboratories and epidemic control.
  • 📋 Selection and acceptance: choose the appropriate protection level by hazard type and concentration, and evaluate overall protection via inward leakage.
✅ Standardized Type 5 performance requirements and inward-leakage testing provide a reliable selection and acceptance basis for respiratory and skin protection in solid-particulate work.

5. Frequently Asked Questions ❓

❓ Q: What is Type 5 protective clothing?
A: Type 5 is a full-body chemical protective suit against airborne solid particulates (dust, aerosols), classified relative to types for liquids (Type 6), jets (Types 3/4), etc., by hazard type.
❓ Q: Why is inward leakage more important than fabric barrier?
A: Good fabric barrier only shows the material blocks particulates, but particulates can enter through closures, seams, and openings. Inward leakage accounts for both fabric and structure, better reflecting overall protection.
❓ Q: How is inward leakage measured?
A: A wearer performs specified movements in a chamber filled with specified aerosol; the inside/outside concentration ratio (inward leakage) is measured and calculated per sampling requirements.
❓ Q: Can Type 5 clothing protect against liquid chemicals?
A: No. Type 5 targets solid particulates; for liquid chemicals choose the appropriate type (e.g., Type 6 splash, Types 3/4 jet) according to the medium.
🔍 Q: What should be considered when selecting protective clothing?
A: Consider hazard type, concentration, work movements, and duration; choose the appropriate type and class, ensure good fit and sealed closures, and verify inward leakage if needed.
🔒
正在加载下载地址,请稍候 10 秒

Leave a Reply

Your email address will not be published. Required fields are marked *