Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
🔥 The BS EN ISO 12952 series is a set of British Standards implementing the European standard EN ISO 12952, developed to assess the ignitability of bedding items. The series was prepared jointly by ISO/TC 38 (Textiles) and CEN/TC 248, with UK participation entrusted to Technical Committees TCI/66/-/8 (Burning behaviour) and TCI/63 (Burning behaviour of textiles). It covers test methods ranging from a smouldering cigarette and a match-flame equivalent ignition source to a small open flame, and is a key reference for assessing the fire safety of mattresses, duvets, pillows, bedspreads and other bedding on the UK and European markets.
Three documents are held in the BSI catalogue for this series, covering different parts and editions of ISO 12952. The 2010 edition restructured the former four-part standard into two parts (Part 1 and Part 2), with parts of the former Parts 3 and 4 merged into the new editions; this collection still retains the 1999 (2000) edition of Part 4. The ICS classification numbers for the series are 13.220.40 (burning behaviour and ignitability of materials and products) and 97.160 (domestic textiles).
| Standard | Year | Title / Subject | Primary Ignition Source / Method |
|---|---|---|---|
| BS EN ISO 12952-1 | 2010 | Assessment of ignitability of bedding items — Part 1: Ignition source: smouldering cigarette | Smouldering cigarette |
| BS EN ISO 12952-2 | 2010 | Assessment of ignitability of bedding items — Part 2: Ignition source: match-flame equivalent | Match-flame equivalent |
| BS EN ISO 12952-4 | 1999 (2000) | Burning behaviour of bedding items — Part 4: Specific test methods for ignitability by a small open flame | Small open flame |
The core concept of the standard is to assess bedding ignitability using a series of ignition sources of increasing severity: the smouldering cigarette, the match-flame equivalent, the small open flame, and larger wooden-crib-based ignition sources. In the UK, hazard grading of bedding and upholstered furniture is expressed by ignition source numbers:
The limited range of ignition sources covered by ISO 12952 is insufficient to cover all hazard categories used in the UK. The BSI national foreword therefore states that additional testing using wooden-crib-based larger ignition sources is required to verify fabric performance for Medium, High and Very High Hazard categories.
Part 1 (smouldering cigarette ignition source) specifies a test method using a smouldering cigarette as the ignition source to assess whether bedding items sustain smouldering or flaming. Specimens are conditioned under the specified standard atmosphere (regulated temperature and relative humidity), placed on the defined test apparatus, and the cigarette is positioned in the standard location while propagation, smouldering or burn-through is recorded.
Part 2 (match-flame equivalent ignition source) uses a standardised ignition source with flame characteristics equivalent to a match (such as a gas burner of specified diameter and length), to assess ignitability of bedding items under a small open flame. It specifies flame application time, test apparatus and criteria for assessment.
Part 4 (specific test methods for a small open flame) is the earlier specific test method, specifying the apparatus, specimen preparation, conditioning and result assessment for ignitability by a small open flame. It is linked to BS 7175 (methods of test for the ignitability of bedcovers and pillows), which was amended to remove conflict with this standard and remains valid for ignition sources between 2 and 7.