🧬 BS EN ISO 3673 specifies the designation system for epoxy resins and methods for preparing test specimens and determining properties of crosslinked epoxy resins. Epoxy resins are among the most widely used thermosetting resins, offering excellent adhesion, chemical resistance, electrical insulation and dimensional stability, and are widely used in coatings, adhesives, composites, electronic encapsulation, flooring and structural repair. The series comprises BS EN ISO 3673-1 (designation) and BS EN ISO 3673-2 (preparation of test specimens and determination of properties of crosslinked epoxy resins).
💡 The performance of epoxy resins depends largely on the curing system (hardener type and dosage) and curing process (temperature, time). Part 2 standardises preparation and property determination of cured products so that property data from different sources are comparable.
1. Series Composition and Scope 📌
The BS EN ISO 3673 series consists of two parts addressing “how to designate” and “how to determine properties of cured products”:
| Part | Standard Title | Main Content | Primary Role |
| BS EN ISO 3673-1 | Plastics — Epoxy resins — Part 1: Designation (2000, from ISO 3673-1:1996) | Epoxy resin designation coding rules, grade identification | Unify epoxy resin grade designation for selection and trade |
| BS EN ISO 3673-2 | Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (2012) | Cured resin specimen preparation, property test items and conditions | Standardise cured-product testing for comparability |
⚠️ Part 1 applies to the designation of uncured epoxy resins; Part 2 applies to property determination of crosslinked (cured) epoxy resins. They address resin raw material and cured product respectively, with different purposes.
2. Designation System (Part 1) — Core Content 🔧
Designation coding: The standard specifies that epoxy resin designation consists of a material code, property data and additional information. The designation code typically includes key characteristics such as epoxy equivalent, viscosity and softening point, plus additional information such as modifiers and diluents.
Basis for specifications: The designation system provides a unified, traceable identification for different epoxy resin grades, helping users select appropriate grades for coatings, adhesives and composites, and serving as the basis for procurement and acceptance.
| Designation element | Description |
| Material code | Identifies the basic epoxy resin type |
| Property data block | Coded characteristic values such as epoxy equivalent, viscosity, softening point |
| Additional information | Modifiers, diluents, fillers |
💡 Epoxy equivalent weight (EEW) is the most important characteristic of an epoxy resin, reflecting the number of epoxy groups per unit mass; it directly determines the hardener dosage and the crosslink density of the cured product.
3. Preparation of Test Specimens and Property Determination of Crosslinked Resins (Part 2) — Core Content 🔩
Specimen preparation: The standard specifies conditions for preparing crosslinked epoxy resin specimens, including resin-hardener ratio, mixing, degassing, casting, curing temperature and time, with conditioning before testing. The curing process directly affects crosslink density and mechanical properties.
Property determination: The standard specifies methods for determining properties of cured epoxy resins, referencing the relevant ISO test method standards, including tensile, flexural, impact, hardness, heat deflection temperature and density. Tests follow the specified specimen type and conditions.
| Property | Description |
| Tensile properties | Tensile strength, elongation at break, tensile modulus |
| Flexural properties | Flexural strength, flexural modulus |
| Impact properties | Charpy/Izod impact strength |
| Hardness | Barcol or Shore hardness, etc. |
| Thermal properties | Heat deflection temperature, glass transition temperature |
| Density | Reflects composition and compactness of the cured product |
⚠️ The degree of cure strongly influences crosslinked resin properties: incomplete cure lowers strength and heat resistance, while overcure may cause embrittlement. Specimen preparation must strictly control the ratio and curing process.
4. Key Technical Requirements and Quality Assurance 📏
- Accurate ratio: Resin and hardener should be accurately weighed per the stoichiometric ratio; ratio deviation changes crosslink density and properties.
- Degassing: Remove bubbles thoroughly before casting to avoid porosity defects that reduce mechanical properties.
- Curing schedule: Cure per the standard temperature-time programme for consistent degree of cure.
- Conditioning: Condition specimens under standard atmosphere before testing for stable, comparable results.
✅ Using the ISO 3673 series, standardised designation of epoxy resins and standardised testing of cured products can be achieved, providing a reliable basis for product design and material acceptance.
5. Engineering Practice Applications 🛠️
- Material selection: Choosing epoxy resin grades meeting application requirements based on designation code.
- Formulation design: Optimising resin-hardener ratio and curing process through cured-product property testing.
- Composites: Evaluating mechanical and thermal properties of epoxy matrices in glass-fibre and carbon-fibre composites.
- Coatings and adhesives: Assessing reliability and durability of epoxy coatings and adhesive joints through cured-product properties.
6. Frequently Asked Questions ❓
❓ Q: What is epoxy equivalent weight (EEW)?
A: EEW is the mass of resin containing one mole of epoxy groups (g/eq), reflecting epoxy group content; it is the key parameter determining hardener dosage and crosslink density.
❓ Q: What is the division of labour between Part 1 and Part 2?
A: Part 1 specifies the designation system for uncured epoxy resins; Part 2 specifies specimen preparation and property determination of crosslinked (cured) epoxy resins.
❓ Q: Why does the curing process strongly affect properties?
A: Curing temperature and time determine the degree of cure and crosslink density, which affect strength, modulus, heat resistance and toughness; follow the standard curing schedule.
❓ Q: Why must the resin be degassed before casting?
A: Bubbles form porosity defects in the cured product, creating stress concentration and significantly reducing mechanical properties; degas thoroughly.
❓ Q: Which epoxy resins does this series apply to?
A: Designation of liquid, semi-solid and solid epoxy resins and property determination of their cured products, widely used in coatings, adhesives, composites, encapsulation and structural repair.