๐ The BS EN 15437 series is the European standard for railway axlebox condition monitoring, adopted by the British Standards Institution (BSI) as BS EN 15437-1:2009 and BS EN 15437-2:2012. It specifies interface and design requirements for axlebox (axle bearing box) condition-monitoring systems: Part 1 covers track side detection equipment and rolling stock axlebox design; Part 2 covers the performance and design requirements of on-board temperature-monitoring systems. It is the key reference for the design, integration and acceptance of hot-axle-box detection and bearing condition monitoring.
๐จ Axlebox bearing overheating (hot axle box) is one of the most dangerous railway faults; if not detected in time, it can cause bearing seizure and even derailment. Axlebox condition-monitoring systems use track side infrared thermometry and on-board temperature monitoring to identify abnormal temperature rises in real time, a vital line of defence for railway operational safety.
1. Series Structure and Scope ๐
The BS EN 15437 series consists of two parts, addressing track side and on-board monitoring:
| Part | Monitoring Mode | Main Object | Key Point |
| BS EN 15437-1:2009 | Track side equipment | Track side hot-axle-box detectors and rolling stock axlebox design | Interface and design requirements for compatible detection |
| BS EN 15437-2:2012 | On-board systems | On-board axlebox temperature monitoring | Performance and design requirements |
UK participation was entrusted to Technical Committee RAE/3/-/5 (Hot axle box detection) and the series is classified under ICS 45.060.01 (Railway rolling stock in general).
โ ๏ธ The UK national foreword draws attention to the distinction between normative and informative clauses: normative clauses give criteria that must be fulfilled to claim compliance, with no deviation permitted; informative clauses are for understanding and use only.
2. Track Side Equipment and Axlebox Design (Part 1) ๐ก
BS EN 15437-1 specifies interface and design requirements for track side hot-axle-box detectors and vehicle axleboxes:
- Axlebox thermal characteristics: the surface heating characteristics shall allow reliable measurement by track side infrared detectors; axlebox design shall consider surface emissivity and visibility of the measurement target zone.
- Detection target zone: the standard defines the position and size of the target zone on the axlebox for track side measurement, ensuring consistent measurability of different vehicle types in the detector’s field of view.
- Track side detector: installation, calibration and measurement requirements of the track side infrared device, plus alarm logic (absolute temperature and relative temperature rise).
- Interface coordination: vehicle axlebox design shall coordinate with the track side detector to avoid obstruction, stray radiation and other interference.
๐ก The core idea of Part 1 is “design coordination”: the vehicle axlebox is actively designed to suit track side measurement needs (e.g., reserving a measurement target zone, controlling surface emissivity), so the track side equipment can reliably monitor different vehicle types โ the basis of interoperability across European operations.
3. On-board Temperature Monitoring System (Part 2) ๐ก๏ธ
BS EN 15437-2 specifies performance and design requirements for on-board axlebox temperature monitoring systems:
- Temperature measurement: the system shall measure axlebox/bearing temperature continuously or periodically, meeting specified range, accuracy and response time.
- Alarm function: the system shall provide graded alarms (warning, alarm) and trigger driver indication or train control measures at specified thresholds.
- Data processing: the system shall process and store temperature data, supporting trend analysis and condition assessment.
- Environmental suitability: the system shall operate reliably in the railway environment (temperature, vibration, electromagnetic interference).
- Fail-safe: system faults shall not cause misjudgement or missed detection; self-test and fault indication shall be provided.
๐จ The alarm thresholds and judgement logic of an on-board monitoring system directly determine “should the train stop for inspection?” Too low a threshold causes frequent false alarms disrupting operations; too high a threshold misses dangerous temperature rises. Set graded judgement based on bearing technical conditions and operating experience.
4. Testing and Verification ๐งช
The standard specifies testing and verification requirements for both systems:
- Track side equipment tests: verify infrared measurement accuracy, stability and alarm logic under specified conditions.
- On-board system tests: verify temperature measurement accuracy, alarm function, environmental suitability (temperature/vibration/EMC) and fail-safe behaviour.
- Integration tests: verify integration of track side equipment with axleboxes and on-board systems with the vehicle interface.
Tests are carried out under specified environmental and operating conditions; results shall meet the standard’s performance indicators and acceptance criteria.
5. Engineering Practice and Application ๐ ๏ธ
- ๐ System planning: network planning should deploy track side hot-axle-box detectors per route characteristics (speed, traffic, climate), and consider retrofitting on-board monitoring.
- ๐ง Axlebox design coordination: new axlebox design should meet BS EN 15437-1 interface requirements, creating good conditions for track side detection.
- ๐ Data analysis: accumulate axlebox temperature and alarm data to establish a bearing health baseline for predictive maintenance.
- ๐ Operational assurance: establish alarm response and handling procedures, defining stop-and-inspect, speed restriction and train-side inspection measures.
6. Frequently Asked Questions โ
โ Q: What is the difference between BS EN 15437-1 and 15437-2?
A: Part 1 covers track side hot-axle-box detectors and vehicle axlebox interface/design; Part 2 covers on-board axlebox temperature monitoring performance and design. The two monitoring modes complement each other.
โ Q: Why is axlebox condition monitored?
A: If not treated in time, bearing overheating can cause seizure, axlebox damage and even derailment. Track side and on-board monitoring identify abnormal temperature rises in real time, enabling early intervention to prevent accidents.
โ Q: Why does track side infrared detection consider axlebox surface emissivity?
A: Infrared thermometry relies on surface infrared radiation; emissivity affects accuracy. If the surface emissivity is too low or inconsistent, the measured temperature is distorted, so axlebox design should ensure a good infrared target zone.
โ Q: How are on-board alarm thresholds determined?
A: Thresholds should be set from the bearing type technical conditions, track side reference and ambient temperature, using a combined strategy of absolute temperature + relative rise + rate of rise, validated by testing and operation.
โ Q: How should I understand “normative” and “informative” clauses?
A: Normative clauses give mandatory requirements that must be met to claim compliance, with no deviation; informative clauses are non-mandatory, helping understanding and use (some annexes may contain optional requirements).